I've heard different stories about what input best to use. I've got excellent results with DSUB. I know someone hwo has changed to DVI and had only a worse result (despite good cables etc.) so he went back to DSUB. My muthbox does not have DVI so choice was easy for me.<br>
<br>I'll get you the modeline I use when I get home. I presume its for 1366x768? I do have 42" though. Also, I've spent many hours finetuning the modline and DPI but never got to 1:1 pixel mapping. I can easily get 1024x768 1:1 pixel mapping, but obviously that is only 4:3. My manual lists 1366x768 @ 75Hz at a supported resolution, and when I start myth the logs say it's 1366x768.<br>
<br>Cheers<br>Johan.<br><br>Message: 4<br>
Date: Wed, 12 Mar 2008 23:54:45 +1300<br>
From: Karl Leaning <<a href="mailto:mythtv@objectivity.co.nz">mythtv@objectivity.co.nz</a>><br>
Subject: [mythtvnz] Sony KF-e50a10<br>
To: MythTV in NZ <<a href="mailto:mythtvnz@lists.linuxnut.co.nz">mythtvnz@lists.linuxnut.co.nz</a>><br>
Message-ID: <<a href="mailto:47D7B675.10708@objectivity.co.nz">47D7B675.10708@objectivity.co.nz</a>><br>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed<br>
<br>
I have spent many months going circles. I have Sony 50" TV and the start<br>
of a myth-box (Linux is running, but not myth yet) using a M2NPV-VM<br>
motherboard.<br>
The HDMI port is currently used by a bluray player so DVI is out. So<br>
which am I best to use, the component out or the VGA DSUB? And most<br>
importantly, does anybody know what modeline to use to get 720p (pref<br>
1:1 pixel). I have tried letting it detect it as a plug'n'pray but the<br>
image is smaller than the screen and the set complains that the signal<br>
is not in range!