[mythtvnz] Bravo + DUKE

[Rory Grant]

Is it possible to snoop mheg data from dvb-s? The only dvb-t I have is an
HDHomeRun on the network

On 7/10/2016 19:09, "Stephen Worthington" <stephen_agent at jsw.gen.nz> wrote:

> On Fri, 07 Oct 2016 18:31:24 +1300, you wrote:
>
> >On Fri, 7 Oct 2016 16:36:59 +1300, you wrote:
> >
> >>On 7 October 2016 at 13:36, Stephen Worthington
> >><stephen_agent at jsw.gen.nz> wrote:
> >>> On Fri, 7 Oct 2016 12:50:06 +1300, you wrote:
> >>>
> >>>>On 7 October 2016 at 11:49, Robert Fisher <robert at fisher.net.nz>
> wrote:
> >>>>
> >>>>>
> >>>>>
> >>>>> On 7 October 2016 at 07:06, Robert Fisher <robert at fisher.net.nz>
> wrote:
> >>>>>
> >>>>>>
> >>>>>> I just did wget http://epg.org.nz/freeview.xml.gz
> >>>>>> and checked the file and found that there is no data for the problem
> >>>>>> channels.
> >>>>>>
> >>>>>> Where do we go from here?
> >>>>>>
> >>>>>
> >>>>> You can call me impatient if you like but I do not know what to do
> next.
> >>>>> Surely I cannot be the only one worried about epg data running out.
> >>>>>
> >>>>
> >>>>You could use the EIT data for the missing channels.
> >>>>
> >>>>Cheers
> >>>>Bruce
> >>>
> >>> Or use mhegepgsnoop.
> >>>
> >>> _______________________________________________
> >>> mythtvnz mailing list
> >>> mythtvnz at lists.linuxnut.co.nz
> >>> http://lists.ourshack.com/mailman/listinfo/mythtvnz
> >>> Archives http://www.gossamer-threads.com/lists/mythtv/mythtvnz/
> >>
> >>With the early demise of Schedules Direct I might have to actually get
> >>mhegepgsnoop working. I got it downloaded and running, but it spits
> >>out a black file, even though it looks to be pointing at my adapter
> >>card directly.
> >>
> >>Other than the readme (which is helpful to a point) are there any
> >>other dummies guides to integrating it into a mythtv setup?
> >
> >The simple way to do it is as a cron job, where you run mhepgsnoop to
> >produce an EPG file, say freeview.xml, and then run:
> >
> >mythfilldatabase --file --sourceid <yoursourceid> --xmlfile
> >freeview.xml
> >
> >I have not tried it, but apparently the Freeview DVB-T channels now
> >have the same EPG data on EIT as they do on MHEG5, so you may just be
> >able to set MythTV to collect EIT data automatically from one or more
> >DVB-T tuner.
>
> And I normally add the --only-update-guide option to mythfilldatabase,
> so it does not try to do any channel changes, which does not work well
> in NZ.
>
> _______________________________________________
> mythtvnz mailing list
> mythtvnz at lists.linuxnut.co.nz
> http://lists.ourshack.com/mailman/listinfo/mythtvnz
> Archives http://www.gossamer-threads.com/lists/mythtv/mythtvnz/
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ourshack.com/pipermail/mythtvnz/attachments/20161007/7699490d/attachment.html>