[mythtvnz] Hauppauge Windham not working (DVB-T)

[Nick Rout]

On Sun, Mar 8, 2015 at 2:03 PM, worik <worik.stanton at gmail.com> wrote:
> My system is not going flawlessly.  Only one of my tuners is working.
>
> I have "2040:7070 Hauppauge Nova-T Stick 3" DVB-T stick working well
>
> My "2040:c000 Hauppauge Windham" DVB-T stick is not.
>
> I am running MythBuntu 14.04
>
> I have installed linux-firmware-nonfree (thus the firmware
> /lib/firmware/sms1xxx-hcw-55xxx-dvbt-02.fw is installed)
>
> In mythtv-setup in the screen for capture cards I have
> /dev/dvb/adapter0/frontend0 and /dev/dvb/adapter1/frontend0 but when I
> edit them they both have /dev/dvb/adapter0/frontend0.  When I edit the
> path for the tuner  to /dev/dvb/adapter1/frontend0 it has an error.
>
> In /dev/dvb/ there is only adapter0
>
>
> "dmesg' is reporting that the Nova-T stick is being used...
>
> ~$ sudo dmesg |grep dvb
> [   14.801916] dvb-usb: found a 'Hauppauge Nova-T Stick' in cold state,
> will try to load a firmware
> [   15.111021] dvb-usb: downloading firmware from file
> 'dvb-usb-dib0700-1.20.fw'
> [   15.816121] dvb-usb: found a 'Hauppauge Nova-T Stick' in warm state.
> [   15.816282] dvb-usb: will pass the complete MPEG2 transport stream to
> the software demuxer.
> [   16.260352] dvb-usb: schedule remote query interval to 50 msecs.
> [   16.260355] dvb-usb: Hauppauge Nova-T Stick successfully initialized
> and connected.
> [   16.260588] usbcore: registered new interface driver dvb_usb_dib0700
>
>
> I have had this stick working in the past so I am a bit perplexed.

The first and most obvious question is : What has changed since "the past".

New kernel?