[mythtvnz] High quality cables

Andrew Ruthven andrew at etc.gen.nz
Mon Feb 16 01:44:15 GMT 2015


On Fri, 2015-02-13 at 14:29 +1300, Don Robertson wrote:
> On Fri, 13 Feb 2015 14:16:17 Steve Holdoway wrote:
> > I'd just keep the lengths as short as possible. Given the local climate,
> > I expect the backend will survive just fine in the roofspace.
> 
> I'm only planning to put the cable in the roof space. I'm too paranoid to put 
> the machines up there in case they burst into flames.
> 
> It is weird. Long run of cable to wall socket + 10m cable = good signal
> 
> Same 10m cable connected directly to the antenna cable splitter = bad signal.

Hey Don,

It is quite possible that by shortening your cable run that now your
signal string is too strong. The longer cable run to the wall socket
will be attenuating the signal a bit...  Perhaps try a coil of cable up
in the roof if you have some lying around?

Cheers,
Andrew

-- 
Andrew Ruthven, Wellington, New Zealand
andrew at etc.gen.nz             |     linux.conf.au 2015 
  New Zealand's only Cloud:   |  BeAwesome in Auckland, NZ
https://catalyst.net.nz/cloud | http://lca2015.linux.org.au





More information about the mythtvnz mailing list