[mythtvnz] Easiest way to change Prime to use Freeview EPG data

[Nick Rout]

On Tue, Mar 23, 2010 at 8:10 PM, Aaron Whitehouse
<lists at whitehouse.org.nz> wrote:
>
> Hadley,
>
> I followed the instructions as described in my post to the list by
> running the following on the backend machine:
> echo "UPDATE channel SET xmltvid = 'prime.freeviewnz.tv' WHERE xmltvid =
> 'prime.sky.co.nz'" | mysql -u mythtv -pmythtv -h 192.168.0.102
> mythconverg
>
> and edited ~/.xmltv/tv_grab_nz-py.conf:
> from "channel!prime.freeviewnz.tv" to "channel=prime.freeviewnz.tv" and
> from "channel=prime.sky.co.nz" to "channel!prime.sky.co.nz".
>
> (192.168.0.102 is the system's IP address.) It all appeared to work, but
> gave no message.
>
> This morning, my guide still shows "Unknown" for Prime. According to the
> system information, mythfilldatabase ran and completed
> successfully. I would really appreciate it if you could check the
> command that you suggested for any mistakes.
>
> Should I have omitted the "-h 192.168.0.102" because I was running it on
> the backend?
>
> Thanks again for your help


does this post help at all?

http://www.gossamer-threads.com/lists/mythtv/mythtvnz/427298#427298