[mythtvnz] Does the HVR 900 have an LNA setting orsomethingsimilar?

[Steven Ellis]

On Mon, March 30, 2009 1:56 pm, Nick Rout wrote:
> On Mon, Mar 30, 2009 at 12:46 PM, Steven Ellis <steven at openmedia.co.nz>
> wrote:
>>
>> On Mon, March 30, 2009 12:31 pm, Alan Walls wrote:
>>> :-(
>>>
>>> I'll check my setup tonight anyway because I needed to get the latest
>>> driver.  Intrepid's driver didn't work for my HVR900 which is the newer
>>> rev B2C0 model.
>>
>> You can see all my postings about the HVR900 here
>>
>> http://www.mythtv.co.nz/mythtv/category/em28xx/
>>
>> I have the older model and there isn't a LNA. In general it will work
>> with
>> a reasonably low signal.
>>
>> If you want to check your signal strength try dvbtune with the correct
>> mutiplex frequency. Here is my output for the three auckland multiplexes
>>
>> mythtv at mythtv:~/dvb/dtt$ dvbtune -c 0 570000000 -m
>> Signal=48316, Verror=0, SNR=59624dB, BlockErrors=0, ()
>
> Is that 48316 out of 65535?

I don't know as these numbers seem to vary from tuner to tuner.

Oh and I just realised there were off my freecom DVB-T stick as I don't
have my HVR-900 plugged in at the moment.

Steve


--------------------------------------------
Steven Ellis - Technical Director
OpenMedia Limited - The Home of myPVR
email   - steven at openmedia.co.nz
website - http://www.openmedia.co.nz