[mythtvnz] DVB cards changing

[Jason Taylor]

no problem.. didn't expect this script to still be needed the promised
fix still dosnt seem to have landed...

2009/7/18 Aaron Whitehouse <lists at whitehouse.org.nz>:
> Hello,
>
> I wouldn't have thought the composite would make a difference - the
> PVR150 has a variety of inputs, but still is only one device node for me.
>
> As Jason says (and he did write the script), it should work to go into
> MythTV backend setup when the card is working and see what /dev/ path
> the Nova-S card is using.  Then type (assuming it is video0):
>
> sudo python udev-rules-jaunty.py   /dev/video0   /dev/video_novas
>
> Then go back into MythTV Backend Setup and change the device node from
> /debv/video0 to /dev/video_novas.  As Jason says, the video0 and video1
> will still change, so you need to use the ones that you created (which
> will not change) to point MythTV and any LIRC stuff to.  Then do the
> same for your video1.
>
> LIRC is a pain, but is more difficult with moving tuner cards - try
> again once you have a static device node.
>
> (Sorry about the name in the copyright, Jason, I couldn't find your real
> one anywhere!)
>
> Regards,
>
> Aaron
>
> _______________________________________________
> mythtvnz mailing list
> mythtvnz at lists.linuxnut.co.nz
> http://lists.ourshack.com/mailman/listinfo/mythtvnz
> Archives http://www.gossamer-threads.com/lists/mythtv/mythtvnz/
>



-- 
"Weekends don't count unless you spend them doing something completely
pointless. " - Calven