[mythtvnz] case for mini itx FE solution

[Nick Rout]

On Tue, Dec 15, 2009 at 8:11 AM, Mark de Reeper <mark.dereeper at gmail.com> wrote:
>
>
> On Mon, Dec 14, 2009 at 5:59 PM, Hadley Rich <hads at nice.net.nz> wrote:
>>
>> On Mon, 2009-12-14 at 17:51 +1300, Nick Rout wrote:
>> > that'd bugger the warranty for sure!
>>
>> Also it's often quite hot behind an LCD so you're likely to cook
>> something.
>>
>
> I recently put one of these cases on the back of an LCD TV,
> http://procase.co.nz/pc/cs5689.html, so far so good. I haven't noticed any
> heat problems but we don't use the TV a lot.

I /think/ hadley was talking about heat problems if you tried to put a
computer /inside/ the TV's case, as was suggested by the OP.

> You could create a bit of an
> air-gap by putting a couple of strips of metal/plastic before mounting the
> case. I'm now on the lookout for a quieter fan, even after slowing it down
> with a resister it is still a bit noisy.
>