[mythtvnz] Tuning FreeView - can't lock transponder and FRONTEND DEVICE busy?

[Craig Whitmore]

> Getting frontend event
> FE_STATUS: FE_HAS_SIGNAL FE_HAS_LOCK FE_HAS_CARRIER FE_HAS_VITERBI 
> FE_HAS_SYNC
> Event:  Frequency: 11756000
>        SymbolRate: 22500000
>        FEC_inner:  3
>
> Bit error rate: 0
> Signal strength: 62208
> SNR: 62495
> FE_STATUS: FE_HAS_SIGNAL FE_HAS_LOCK FE_HAS_CARRIER FE_HAS_VITERBI 
> FE_HAS_SYNC
> frontend: 8FRONTEND DEVICE: : Device or resource busy
>
>

This is normal with one of these cards. (the drivers are a little bugy) 
:-(  Don't fret.. just continue. the 8FRONTEND DEVICE: : Device or resource 
busy is just a bug in the drivers and actually means you have locked into a 
correct freq.

Just tune in with myth as normal and everything will work. All the above 
step does is test if you get a signal.

Thanks