[GNUz] Voyage + pcmcia modem, stage2
Rik Tindall
gnuz@inode.co.nz
Sun, 28 May 2006 22:56:02 +1200
Howdy team,
Nick's enhanced kernel runs so - any ideas please? (extracts):
#cat syslog
[MC load error was due to systemmap not given to Grub, now fixed]
May 28 21:04:29 P4Voyage0-2 kernel: Inspecting
/boot/System.map-2.6.15.6-ubuntu1-486-voyage
May 28 21:04:30 P4Voyage0-2 kernel: Loaded 19661 symbols from
/boot/System.map-2.6.15.6-ubuntu1-486-voyage.
May 28 21:04:30 P4Voyage0-2 kernel: Symbols match kernel version 2.6.15.
May 28 21:04:30 P4Voyage0-2 kernel: No module symbols loaded - kernel
modules not enabled.
May 28 21:04:30 P4Voyage0-2 kernel: Linux version
2.6.15.6-ubuntu1-486-voyage (root@ubuntu) (gcc version 4.0.2 20050808
(prerelease) (Ubuntu 4.0.1-4ubuntu9)) #1 PREEMPT Sat May 27 01:03:59
NZST 2006 ...
May 28 21:04:30 P4Voyage0-2 kernel: PCI: Bus 2, cardbus bridge: 0000:00:0a.0
May 28 21:04:30 P4Voyage0-2 kernel: IO window: 00001800-000018ff
May 28 21:04:30 P4Voyage0-2 kernel: IO window: 00001c00-00001cff
May 28 21:04:30 P4Voyage0-2 kernel: PREFETCH window: 30000000-31ffffff
May 28 21:04:30 P4Voyage0-2 kernel: MEM window: 32000000-33ffffff
May 28 21:04:30 P4Voyage0-2 kernel: PCI: Enabling device 0000:00:0a.0
(0000 -> 0003)
May 28 21:04:30 P4Voyage0-2 kernel: **** SET: Misaligned resource
pointer: dbccf6c2 Type 07 Len 0
#cat daemonlog
May 28 21:04:32 P4Voyage0-2 cardmgr[2132]: watching 1 socket
May 28 21:04:32 P4Voyage0-2 cardmgr[2133]: starting, version is 3.2.5
May 28 21:04:32 P4Voyage0-2 cardmgr[2133]: socket 0: Serial or Modem
May 28 21:04:32 P4Voyage0-2 pptpd[2137]: MGR: Manager process started
May 28 21:04:32 P4Voyage0-2 pptpd[2137]: MGR: Maximum of 100 connections
available
May 28 21:04:32 P4Voyage0-2 cardmgr[2133]: executing: 'modprobe serial_cs'
May 28 21:04:32 P4Voyage0-2 cardmgr[2133]: get dev info on socket 0
failed: No such device ...
May 28 21:04:30 P4Voyage0-2 kernel: pcc_acpi: loading...
May 28 21:04:30 P4Voyage0-2 kernel: serio: i8042 AUX port at 0x60,0x64
irq 12
May 28 21:04:30 P4Voyage0-2 kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
May 28 21:04:30 P4Voyage0-2 kernel: Serial: 8250/16550 driver $Revision:
1.90 $ 2 ports, IRQ sharing enabled
May 28 21:04:30 P4Voyage0-2 kernel: serial8250: ttyS1 at I/O 0x2f8 (irq
= 3) is a 16550A
May 28 21:04:30 P4Voyage0-2 kernel: PCI: Enabling device 0000:00:08.0
(0000 -> 0003)
May 28 21:04:30 P4Voyage0-2 kernel: **** SET: Misaligned resource
pointer: dbdf9bc2 Type 07 Len 0
May 28 21:04:30 P4Voyage0-2 kernel: ACPI: PCI Interrupt Link [LNK6]
enabled at IRQ 10
May 28 21:04:30 P4Voyage0-2 kernel: PCI: setting IRQ 10 as level-triggered
May 28 21:04:30 P4Voyage0-2 kernel: ACPI: PCI Interrupt 0000:00:08.0[A]
-> Link [LNK6] -> GSI 10 (level, low) -> IRQ 10
May 28 21:04:30 P4Voyage0-2 kernel: 0000:00:08.0: ttyS0 at I/O 0x1428
(irq = 10) is a 8250
May 28 21:04:30 P4Voyage0-2 kernel: Couldn't register serial port
0000:00:08.0: -28 ...
May 28 21:04:30 P4Voyage0-2 kernel: device-mapper: 4.4.0-ioctl
(2005-01-12) initialised: dm-devel@redhat.com
May 28 21:04:30 P4Voyage0-2 kernel: ACPI: PCI Interrupt 0000:00:0a.0[A]
-> Link [LNK5] -> GSI 11 (level, low) -> IRQ 11
May 28 21:04:30 P4Voyage0-2 kernel: Yenta: CardBus bridge found at
0000:00:0a.0 [103c:0850]
May 28 21:04:30 P4Voyage0-2 kernel: Yenta O2: res at 0x94/0xD4: 00/ea
May 28 21:04:30 P4Voyage0-2 kernel: Yenta O2: enabling read
prefetch/write burst
May 28 21:04:30 P4Voyage0-2 kernel: Yenta: ISA IRQ mask 0x00b8, PCI irq 11
May 28 21:04:30 P4Voyage0-2 kernel: Socket status: 30000411 ...
May 28 21:04:32 P4Voyage0-2 kernel: pcmcia: Detected deprecated PCMCIA
ioctl usage.
May 28 21:04:32 P4Voyage0-2 kernel: pcmcia: This interface will soon be
removed from the kernel; please expect breakage unless you upgrade to
new tools.
May 28 21:04:32 P4Voyage0-2 kernel: pcmcia: see
http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details.
May 28 21:04:32 P4Voyage0-2 cardmgr[2132]: watching 1 socket
May 28 21:04:32 P4Voyage0-2 kernel: cs: IO port probe 0x100-0x4ff:
excluding 0x378-0x37f 0x408-0x40f 0x480-0x48f 0x4d0-0x4d7
May 28 21:04:32 P4Voyage0-2 kernel: cs: IO port probe 0x800-0x8ff: clean.
May 28 21:04:32 P4Voyage0-2 kernel: cs: IO port probe 0xc00-0xcff: clean.
May 28 21:04:32 P4Voyage0-2 kernel: cs: IO port probe 0xa00-0xaff: clean.
May 28 21:04:32 P4Voyage0-2 cardmgr[2133]: starting, version is 3.2.5
May 28 21:04:32 P4Voyage0-2 kernel: cs: memory probe
0xa0000000-0xa0ffffff: clean.
May 28 21:04:32 P4Voyage0-2 cardmgr[2133]: socket 0: Serial or Modem
May 28 21:04:32 P4Voyage0-2 pptpd[2137]: MGR: Manager process started
May 28 21:04:32 P4Voyage0-2 pptpd[2137]: MGR: Maximum of 100 connections
available
May 28 21:04:32 P4Voyage0-2 cardmgr[2133]: executing: 'modprobe serial_cs'
May 28 21:04:32 P4Voyage0-2 kernel: pcmcia: registering new device pcmcia0.0
May 28 21:04:32 P4Voyage0-2 kernel: serial_cs:
serial8250_register_port() at 0x03f8, irq 3 failed
May 28 21:04:32 P4Voyage0-2 cardmgr[2133]: get dev info on socket 0
failed: No such device ...
#lsmod
Module Size Used by
ppp_generic 18964 0
slhc 5504 1 ppp_generic
sc520_wdt 4652 1
serial_cs 16392 1
pcmcia 28588 3 serial_cs
firmware_class 7296 1 pcmcia
yenta_socket 21516 4
rsrc_nonstatic 9984 1 yenta_socket
pcmcia_core 31376 3 pcmcia,yenta_socket,rsrc_nonstatic
dm_mod 42680 0
hostap_pci 45328 2
hostap 95236 1 hostap_pci
ieee80211_crypt 4480 1 hostap
natsemi 21600 0
crc32 4096 2 pcmcia,natsemi
#cat messages
May 28 21:04:30 P4Voyage0-2 kernel: pcc_acpi: loading...
May 28 21:04:30 P4Voyage0-2 kernel: serio: i8042 AUX port at 0x60,0x64
irq 12
May 28 21:04:30 P4Voyage0-2 kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
May 28 21:04:30 P4Voyage0-2 kernel: Serial: 8250/16550 driver $Revision:
1.90 $ 2 ports, IRQ sharing enabled
May 28 21:04:30 P4Voyage0-2 kernel: serial8250: ttyS1 at I/O 0x2f8 (irq
= 3) is a 16550A
May 28 21:04:30 P4Voyage0-2 kernel: PCI: Enabling device 0000:00:08.0
(0000 -> 0003)
May 28 21:04:30 P4Voyage0-2 kernel: **** SET: Misaligned resource
pointer: dbdf9bc2 Type 07 Len 0
May 28 21:04:30 P4Voyage0-2 kernel: ACPI: PCI Interrupt Link [LNK6]
enabled at IRQ 10
May 28 21:04:30 P4Voyage0-2 kernel: PCI: setting IRQ 10 as level-triggered
May 28 21:04:30 P4Voyage0-2 kernel: ACPI: PCI Interrupt 0000:00:08.0[A]
-> Link [LNK6] -> GSI 10 (level, low) -> IRQ 10
May 28 21:04:30 P4Voyage0-2 kernel: 0000:00:08.0: ttyS0 at I/O 0x1428
(irq = 10) is a 8250
May 28 21:04:30 P4Voyage0-2 kernel: Couldn't register serial port
0000:00:08.0: -28 ...
May 28 21:04:30 P4Voyage0-2 kernel: device-mapper: 4.4.0-ioctl
(2005-01-12) initialised: dm-devel@redhat.com
May 28 21:04:30 P4Voyage0-2 kernel: ACPI: PCI Interrupt 0000:00:0a.0[A]
-> Link [LNK5] -> GSI 11 (level, low) -> IRQ 11
May 28 21:04:30 P4Voyage0-2 kernel: Yenta: CardBus bridge found at
0000:00:0a.0 [103c:0850]
May 28 21:04:30 P4Voyage0-2 kernel: Yenta O2: res at 0x94/0xD4: 00/ea
May 28 21:04:30 P4Voyage0-2 kernel: Yenta O2: enabling read
prefetch/write burst
May 28 21:04:30 P4Voyage0-2 kernel: Yenta: ISA IRQ mask 0x00b8, PCI irq 11
May 28 21:04:30 P4Voyage0-2 kernel: Socket status: 30000411 ...
May 28 21:04:30 P4Voyage0-2 kernel: pccard: PCMCIA card inserted into
slot 0 ...
May 28 21:04:32 P4Voyage0-2 kernel: pcmcia: Detected deprecated PCMCIA
ioctl usage.
May 28 21:04:32 P4Voyage0-2 kernel: pcmcia: This interface will soon be
removed from the kernel; please expect breakage unless you upgrade to
new tools.
May 28 21:04:32 P4Voyage0-2 kernel: pcmcia: see
http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details.
May 28 21:04:32 P4Voyage0-2 kernel: cs: IO port probe 0x100-0x4ff:
excluding 0x378-0x37f 0x408-0x40f 0x480-0x48f 0x4d0-0x4d7
May 28 21:04:32 P4Voyage0-2 kernel: cs: IO port probe 0x800-0x8ff: clean.
May 28 21:04:32 P4Voyage0-2 kernel: cs: IO port probe 0xc00-0xcff: clean.
May 28 21:04:32 P4Voyage0-2 kernel: cs: IO port probe 0xa00-0xaff: clean.
May 28 21:04:32 P4Voyage0-2 kernel: cs: memory probe
0xa0000000-0xa0ffffff: clean.
May 28 21:04:32 P4Voyage0-2 kernel: pcmcia: registering new device pcmcia0.0
May 28 21:04:32 P4Voyage0-2 kernel: serial_cs:
serial8250_register_port() at 0x03f8, irq 3 failed
#cat kern.log
May 28 21:04:30 P4Voyage0-2 kernel: Serial: 8250/16550 driver $Revision:
1.90 $ 2 ports, IRQ sharing enabled
May 28 21:04:30 P4Voyage0-2 kernel: serial8250: ttyS1 at I/O 0x2f8 (irq
= 3) is a 16550A
May 28 21:04:30 P4Voyage0-2 kernel: PCI: Enabling device 0000:00:08.0
(0000 -> 0003)
May 28 21:04:30 P4Voyage0-2 kernel: **** SET: Misaligned resource
pointer: dbdf9bc2 Type 07 Len 0
May 28 21:04:30 P4Voyage0-2 kernel: ACPI: PCI Interrupt Link [LNK6]
enabled at IRQ 10
May 28 21:04:30 P4Voyage0-2 kernel: PCI: setting IRQ 10 as level-triggered
May 28 21:04:30 P4Voyage0-2 kernel: ACPI: PCI Interrupt 0000:00:08.0[A]
-> Link [LNK6] -> GSI 10 (level, low) -> IRQ 10
May 28 21:04:30 P4Voyage0-2 kernel: 0000:00:08.0: ttyS0 at I/O 0x1428
(irq = 10) is a 8250
May 28 21:04:30 P4Voyage0-2 kernel: Couldn't register serial port
0000:00:08.0: -28 ...
May 28 21:04:32 P4Voyage0-2 kernel: pcmcia: registering new device pcmcia0.0
May 28 21:04:32 P4Voyage0-2 kernel: serial_cs:
serial8250_register_port() at 0x03f8, irq 3 failed
This is a binary distro, right? So running the installer would have..
set up the driver modules correctly? No, the serial_cs wasn't available
to it.. [?]
Cheers
--
Rik