<div dir="ltr"><div><div>I got the first out-of-date boards from OSH Park, and decided to populate one.  It works as predicted:<br><br><img src="cid:ii_i1qpdpqa0_1494d9ed376c3341" width="390" height="208"><br><br></div>The big chip in the middle is an FT240X USB FIFO chip, which I use in bit-bang mode to drive the INM which is on the right half.  I've got a better board, based on Paul's feedback, coming in a few days.  It will have a proper USB connector and plastic housing with nickle-based shielding paint on the inside.  There will be a ground plane on the bottom, and the vias will be smaller, and covered by the solder mask.<br><br></div><div>This is the first surface-mount board I ever designed.  It was a ton of fun!  OSH Park is awesome.<br></div><div><br>Bill<br></div></div>