<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
<meta name="Generator" content="Microsoft Exchange Server">
<!-- converted from text --><style><!-- .EmailQuote { margin-left: 1pt; padding-left: 4pt; border-left: #800000 2px solid; } --></style>
</head>
<body>
<div dir="auto">
<div dir="auto">Hi all, just a reminder, we are open now.</div>
<div dir="auto">Fyi we have a lot of appliances up for grabs. Most need a plug to be fitted to get going again. </div>
<div dir="auto"><br>
</div>
<div dir="auto">Unit 11, 21 Michelle rd. Wigram</div>
<div dir="auto">Open till 1pm</div>
<div dir="auto"><br>
</div>
<div dir="auto">Cheers,</div>
<div dir="auto">Rudy</div>
<div dir="auto"><br>
</div>
<div dir="auto"><br>
</div>
<div dir="auto"><br>
</div>
<div id="x_composer_signature" dir="auto">
<div dir="auto" style="font-size:85%; color:#575757">Sent from my Galaxy</div>
</div>
<div dir="auto"><br>
</div>
<div><br>
</div>
<div><br>
</div>
<div>-------- Original message --------</div>
<div>From: Mark Atherton <markaren1@xtra.co.nz> </div>
<div>Date: 23/07/21 8:37 PM (GMT+12:00) </div>
<div>To: Christchurch Robotics <chchrobotics@lists.linuxnut.co.nz> </div>
<div>Subject: [chbot] Quad chock fish challenge </div>
<div><br>
</div>
</div>
<font size="2"><span style="font-size:11pt;">
<div class="PlainText">Just acquired a small pile of 250kg load-cells, and everything was going
<br>
swimmingly until I looked a little too closely.<br>
<br>
A) 5.0V DC excitation voltage is applied between Red and White wires. At <br>
rest, and with respect to White, both Black and Yellow are at 2.50V. And <br>
yes, I have checked that there is 0V between BLK and YEL. Apply some <br>
force to the unit and the bridge unbalances just as it should and a <br>
100kg or so produces a 12mV imbalance which sounds about right from <br>
previous experience.<br>
<br>
B) With the unit completely disconnected, the resistance looking between <br>
YEL-RED, YEL-WH, BLK-WH and BLK-RED are each 600 ohms ± sod-all.<br>
<br>
C) I was hoping that I wouldn't be pushing my luck too far by assuming <br>
that each network leg would be 800 ohms. (600R external = 800R internal <br>
in parallel with (3 * 800R internal).<br>
<br>
D) But alas no, BLK-YEL is 700R and RED-WH is 765R. This rather implies <br>
that the upper resistor pair are different values to the lower resistor <br>
pair. However if that was true, then test A would not indicate a 50% <br>
voltage division.<br>
<br>
Also, if each internal limb was 800R, then there should be 800R in both <br>
cases of D).<br>
<br>
So clearly applying 5V excitation is different from using an ohm-meter, <br>
so I dropped excitation voltage to 260mV and the mid-point voltage was <br>
still 50%. I also heated the unit from 17c up to around 27c without any <br>
significant change.<br>
<br>
Swapping polarities of just about everything does not affect results, so <br>
it looks like a purely resistive network (unless there is something <br>
weird about strain-gauges I am unaware of).<br>
<br>
Also tried exciting BLK-YEL which made no difference. BLK-RED and <br>
BLK-YEL still measured 2.5V each (per A above).<br>
<br>
I am running out of things to poke at from the outside, and am quite <br>
intrigued about the fundamental (and incorrect) assumption I have made <br>
with all of these tests.<br>
<br>
The units appear to work as expected, but can't find a datasheet (units <br>
are marked 250kg 1420230).<br>
<br>
Suggestions please.<br>
<br>
-Mark<br>
<br>
</div>
</span></font>
</body>
</html>