<div dir="ltr">Mark,<div><br></div><div>The Enable street cabinets contain passive optical splitters and I do not believe they require power.</div><div><br></div><div>The technology used is GPON, where the P is for passive.</div><div><br></div><div>In general terms, one fibre comes from the "exchange" and is passively split at the cabinet (up to 32 ways?) to you and your neighbours. The ONTs are responsible for multiplexing/demultiplexing in coordination with one another. This is part of the reason they are owned by the network.</div><div><br></div><div>Spencer</div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Fri, Mar 5, 2021 at 1:17 PM Mark Atherton <<a href="mailto:markaren1@xtra.co.nz">markaren1@xtra.co.nz</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">Thanks Helmut.<br>
<br>
I am familiar with VOIP, I have 2talk account and a collection of VOIP <br>
phones, and ATAs.<br>
<br>
I can deal with local power within the premises, but much more concerned <br>
that the cabinets back to the CO will still be powered (if indeed they <br>
need such).<br>
<br>
Presumably Central Offices still have huge backup batteries since they <br>
will be feeding cell-towers etc.<br>
<br>
So, really just trying to understand the whole mess.<br>
<br>
We do have two cell-phones, each with separate suppliers, so diversity <br>
there. Also have a means to connect mobile-data into the local network <br>
via a bridge, should we lose regular internet.<br>
<br>
If we are going to make changes, I am interested in learning about <br>
data-supply limitations before we push the purchase button, not after :)<br>
<br>
Regards, Mark<br>
<br>
PS thanks for those links; interesting reading.<br>
<br>
<br>
<br>
On 5/03/2021 11:40 AM, Helmut Walle wrote:<br>
> Sorry, Mark - I did not respond to the dial tone question initially, because you had already<br>
> mentioned that you would need backup power for your router to keep it going, and that the rest<br>
> of the system would need to have a backup power supply, too - so it looked like an acknowledged<br>
> and well understood issue.<br>
> <br>
> But actually there may be a little bit more to it... as per Charles's comment below the dial<br>
> tone itself is generated by the router if the router does have analogue / POTS telephony ports<br>
> (many or probably most do, but if it's important check what you get or are buying). If it does<br>
> not you can still use a VoIP app on any terminal equipment (Mobile phone, tablet, laptop,<br>
> desktop PC) connected to a VoIP service via any Internet connection (you can for example run a<br>
> VoIP call using a mobile phone over a 4G/LTE based Internet connection just fine, even though<br>
> that is not the "standard" way of making voice calls on 4G). If you need to be able to connect<br>
> an old-style analogue phone you will either need a router with support for analogue phones, or<br>
> you can add an Analogue Telephone Adapter (ATA) that provides both the physical interface and<br>
> all the protocols required for VoIP calling. Or you can use a VoIP phone set to plug into your<br>
> LAN. Obviously any and all of these devices needs backup power.<br>
> <br>
> Now there is a further point to consider: the fibre does not plug into the router. The fibre<br>
> will per definition only reach to the optical network termination (ONT). In principle this could<br>
> be anywhere, but in practice it will probably end up being either close to where the line enters<br>
> the house, or if there is a telecommunications cabinet (probably the case in all recent builds)<br>
> where all the various networs cables are ending (TV, LAN, phone, ...) it will be there. The ONT,<br>
> true to its name, terminates the optical network connection at the customer premises end, and it<br>
> provides a range of demultiplexing / multiplexing services and respective physical ports. It<br>
> will at least have an Ethernet port (should be Gbps), because that is needed to connect the<br>
> router, and it may well have analogue telephony ports, too. The ONT that came with my "default"<br>
> fibre install has 4 x Eth and 2 x Phone. Only one of my Eth ports is used to connect the router.<br>
> But I am not using the phone ports on the ONT at all, because the ONT is in the telecoms cabinet<br>
> in the garage, whereas the router is in the lounge, and that is where I need the phone. The<br>
> "default" router that I got also has two analogue phone ports...<br>
> <br>
> Soooo - for me to have a dial tone during a mains outage, I would need backup power for both ONT<br>
> and router. And that is in addition to backup power for the phone itself, because, although it<br>
> is an "analogue" phone it actually is a wireless type that obviously also needs a power supply.<br>
> Now where I wrote backup power, none of these devices really need an AC mains supply, as they<br>
> all happen to come with a plug pack anyway... So a much simpler "UPS" consisting just of a<br>
> battery and a trickle / maintenance charger would be quite sufficient.<br>
> <br>
> With all of that hassle in mind, and mains outages being quite rare here, a mobile phone may be<br>
> the better option for emergency calling.<br>
> <br>
> Further to the technical discussion above, there are also regulations in place to set out<br>
> requirements for emergency calling services. These also include requirements for making<br>
> customers aware of the possibility of loss of certain services in the event of a power outage.<br>
> If you are interested in that the NZ Telecommunications Forum may be a starting point,<br>
> specifically the "Broadband Product Disclosure Code" and the "Emergency Voice Calling Services<br>
> Code":<br>
> <br>
> <a href="https://www.tcf.org.nz/industry/standards-compliance/customer-experience/broadband-product-disclosure/" rel="noreferrer" target="_blank">https://www.tcf.org.nz/industry/standards-compliance/customer-experience/broadband-product-disclosure/</a><br>
> <a href="https://www.tcf.org.nz/industry/standards-compliance/customer-experience/broadband-product-disclosure/" rel="noreferrer" target="_blank">https://www.tcf.org.nz/industry/standards-compliance/customer-experience/broadband-product-disclosure/</a><br>
> <br>
> I am not too familiar with the higher-level regulatory framework and its drivers, but the<br>
> Telecommunications Act could provide relevant information. Schedule 2A of the Act about the<br>
> Copper Withdrawal Code may be relevant, too. The finalised Copper Withdrawal Code itself has<br>
> just been published recently<br>
> <a href="https://comcom.govt.nz/regulated-industries/telecommunications/projects/copper-withdrawal-code?target=documents&root=210534" rel="noreferrer" target="_blank">https://comcom.govt.nz/regulated-industries/telecommunications/projects/copper-withdrawal-code?target=documents&root=210534</a><br>
> <br>
> <br>
> Kind regards,<br>
> <br>
> Helmut.<br>
> <br>
> <br>
> On 05/03/2021 08:32, Charles Manning wrote:<br>
> [...]<br>
>><br>
>> Unlike with ADSL, you will not get a dial tone in a power outage.  There is no ring voltage over<br>
>> fibre because it is non-conductive. That has to be recreated in-house by the fibre modem thingy<br>
>> (I assure you that is the correct technical term :-)). If that is not getting power then no dial<br>
>> tone. If you have a UPS then you should be good.<br>
>><br>
>> -- Charles<br>
> <br>
> _______________________________________________<br>
> Chchrobotics mailing list <a href="mailto:Chchrobotics@lists.ourshack.com" target="_blank">Chchrobotics@lists.ourshack.com</a><br>
> <a href="https://lists.ourshack.com/mailman/listinfo/chchrobotics" rel="noreferrer" target="_blank">https://lists.ourshack.com/mailman/listinfo/chchrobotics</a><br>
> Mail Archives: <a href="http://lists.ourshack.com/pipermail/chchrobotics/" rel="noreferrer" target="_blank">http://lists.ourshack.com/pipermail/chchrobotics/</a><br>
> Meetings usually 3rd Monday each month. See <a href="http://kiwibots.org" rel="noreferrer" target="_blank">http://kiwibots.org</a> for venue, directions and dates.<br>
> When replying, please edit your Subject line to reflect new subjects.<br>
> <br>
<br>
<br>
_______________________________________________<br>
Chchrobotics mailing list <a href="mailto:Chchrobotics@lists.ourshack.com" target="_blank">Chchrobotics@lists.ourshack.com</a><br>
<a href="https://lists.ourshack.com/mailman/listinfo/chchrobotics" rel="noreferrer" target="_blank">https://lists.ourshack.com/mailman/listinfo/chchrobotics</a><br>
Mail Archives: <a href="http://lists.ourshack.com/pipermail/chchrobotics/" rel="noreferrer" target="_blank">http://lists.ourshack.com/pipermail/chchrobotics/</a><br>
Meetings usually 3rd Monday each month. See <a href="http://kiwibots.org" rel="noreferrer" target="_blank">http://kiwibots.org</a> for venue, directions and dates.<br>
When replying, please edit your Subject line to reflect new subjects.</blockquote></div>