<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
</head>
<body>
<p>Stupid question: would a usb / ttl converter do what you need? I
have at least one cable you are welcome to try (possibly another
somewhere)<br>
</p>
<p><a class="moz-txt-link-freetext" href="https://nz.mouser.com/ProductDetail/BK-Precision/IT-E132?qs=s9e3C%252B7F3LmVKDVIizC16w==">https://nz.mouser.com/ProductDetail/BK-Precision/IT-E132?qs=s9e3C%252B7F3LmVKDVIizC16w==</a></p>
<p>Cheers</p>
<p>Alan<br>
</p>
<div class="moz-cite-prefix">On 12/09/20 1:14 pm, Trevor Wignall
wrote:<br>
</div>
<blockquote type="cite"
cite="mid:CAJKUhDMvtk9+e04quUUgc6E8sMH_TchPy32m3CUQPBF0UoSayg@mail.gmail.com">
<meta http-equiv="content-type" content="text/html; charset=UTF-8">
<div dir="ltr">TTL compatible CMOS chips are available, and will
probably meet your need. I haven't researched this, but I expect
there will be suitable drivers available. You might need two
ICs, one inverting and one non-inverting. If one output isn't
grunty enough, two or more outputs can be parallelled.
<div>Trevor</div>
</div>
<br>
<div class="gmail_quote">
<div dir="ltr" class="gmail_attr">On Sat, Sep 12, 2020 at 7:20
AM Mark Atherton <<a href="mailto:markaren1@xtra.co.nz"
moz-do-not-send="true">markaren1@xtra.co.nz</a>> wrote:<br>
</div>
<blockquote class="gmail_quote" style="margin:0px 0px 0px
0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">No
sure how many channels you need, possibly 4 ?<br>
<br>
26C31 is a standard quad RS422 driver. RS485 drivers can be
used with <br>
the TX output enable tied active.<br>
<br>
MAX485 is a single channel, and I guess at NZ$3.50 ea, you
could buy several<br>
<br>
also have a look at <br>
<a
href="https://www.trademe.co.nz/a/marketplace/electronics-photography/other-electronics/electronic-components/other/listing/2775249657"
rel="noreferrer" target="_blank" moz-do-not-send="true">https://www.trademe.co.nz/a/marketplace/electronics-photography/other-electronics/electronic-components/other/listing/2775249657</a>
<br>
<br>
<br>
-Mark<br>
<br>
<br>
<br>
On 11/09/2020 10:44 PM, Martin Towers wrote:<br>
> Hi Wallace,<br>
> You might try looking for TTL to RS485 converters.<br>
> This is a bad example - it's expensive and in India, but
it shows they<br>
> exist.<br>
> <a href="https://robu.in/product/max485-ttl-rs485/"
rel="noreferrer" target="_blank" moz-do-not-send="true">https://robu.in/product/max485-ttl-rs485/</a><br>
> <br>
> Martin<br>
> <br>
> <br>
> On Fri, 2020-09-11 at 16:12 +1200, Marshland Engineering
wrote:<br>
>> My encoder has become intermittent on my CNC mill. I
have found that<br>
>> my Liner<br>
>> scale from Aliexpress has the correct resolution to
work with the<br>
>> controls.<br>
>> The problem I have is the linear scale is TTL
output and the<br>
>> connection I<br>
>> require is differential equivalent to a SN75183.<br>
>><br>
>> <a
href="https://www.ti.com/lit/ds/symlink/sn75183.pdf"
rel="noreferrer" target="_blank" moz-do-not-send="true">https://www.ti.com/lit/ds/symlink/sn75183.pdf</a><br>
>><br>
>> Anyone know of an off the shelf TTL to differential
unit. My searches<br>
>> don't<br>
>> yield much other than discrete components. Maybe
there is another<br>
>> workaround?<br>
>><br>
>> Thanks Wallace.<br>
>><br>
>><br>
>><br>
>> _______________________________________________<br>
>> Chchrobotics mailing list <a
href="mailto:Chchrobotics@lists.ourshack.com"
target="_blank" moz-do-not-send="true">Chchrobotics@lists.ourshack.com</a><br>
>> <a
href="https://lists.ourshack.com/mailman/listinfo/chchrobotics"
rel="noreferrer" target="_blank" moz-do-not-send="true">https://lists.ourshack.com/mailman/listinfo/chchrobotics</a><br>
>> Mail Archives: <a
href="http://lists.ourshack.com/pipermail/chchrobotics/"
rel="noreferrer" target="_blank" moz-do-not-send="true">http://lists.ourshack.com/pipermail/chchrobotics/</a><br>
>> Meetings usually 3rd Monday each month. See <a
href="http://kiwibots.org" rel="noreferrer" target="_blank"
moz-do-not-send="true">http://kiwibots.org</a> for<br>
>> venue, directions and dates.<br>
>> When replying, please edit your Subject line to
reflect new subjects.<br>
> <br>
> <br>
> _______________________________________________<br>
> Chchrobotics mailing list <a
href="mailto:Chchrobotics@lists.ourshack.com"
target="_blank" moz-do-not-send="true">Chchrobotics@lists.ourshack.com</a><br>
> <a
href="https://lists.ourshack.com/mailman/listinfo/chchrobotics"
rel="noreferrer" target="_blank" moz-do-not-send="true">https://lists.ourshack.com/mailman/listinfo/chchrobotics</a><br>
> Mail Archives: <a
href="http://lists.ourshack.com/pipermail/chchrobotics/"
rel="noreferrer" target="_blank" moz-do-not-send="true">http://lists.ourshack.com/pipermail/chchrobotics/</a><br>
> Meetings usually 3rd Monday each month. See <a
href="http://kiwibots.org" rel="noreferrer" target="_blank"
moz-do-not-send="true">http://kiwibots.org</a> for venue,
directions and dates.<br>
> When replying, please edit your Subject line to reflect
new subjects.<br>
> <br>
<br>
<br>
_______________________________________________<br>
Chchrobotics mailing list <a
href="mailto:Chchrobotics@lists.ourshack.com"
target="_blank" moz-do-not-send="true">Chchrobotics@lists.ourshack.com</a><br>
<a
href="https://lists.ourshack.com/mailman/listinfo/chchrobotics"
rel="noreferrer" target="_blank" moz-do-not-send="true">https://lists.ourshack.com/mailman/listinfo/chchrobotics</a><br>
Mail Archives: <a
href="http://lists.ourshack.com/pipermail/chchrobotics/"
rel="noreferrer" target="_blank" moz-do-not-send="true">http://lists.ourshack.com/pipermail/chchrobotics/</a><br>
Meetings usually 3rd Monday each month. See <a
href="http://kiwibots.org" rel="noreferrer" target="_blank"
moz-do-not-send="true">http://kiwibots.org</a> for venue,
directions and dates.<br>
When replying, please edit your Subject line to reflect new
subjects.</blockquote>
</div>
<br>
<fieldset class="mimeAttachmentHeader"></fieldset>
<pre class="moz-quote-pre" wrap="">_______________________________________________
Chchrobotics mailing list <a class="moz-txt-link-abbreviated" href="mailto:Chchrobotics@lists.ourshack.com">Chchrobotics@lists.ourshack.com</a>
<a class="moz-txt-link-freetext" href="https://lists.ourshack.com/mailman/listinfo/chchrobotics">https://lists.ourshack.com/mailman/listinfo/chchrobotics</a>
Mail Archives: <a class="moz-txt-link-freetext" href="http://lists.ourshack.com/pipermail/chchrobotics/">http://lists.ourshack.com/pipermail/chchrobotics/</a>
Meetings usually 3rd Monday each month. See <a class="moz-txt-link-freetext" href="http://kiwibots.org">http://kiwibots.org</a> for venue, directions and dates.
When replying, please edit your Subject line to reflect new subjects.</pre>
</blockquote>
</body>
</html>