<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
</head>
<body text="#000000" bgcolor="#FFFFFF">
<div class="moz-cite-prefix">So, a bit like <a
href="https://www.banggood.com/search/990669.html">https://www.banggood.com/search/990669.html<br>
</a></div>
<div class="moz-cite-prefix"><br>
</div>
<div class="moz-cite-prefix">Looks like the standard length is 34mm,
colours may be standard, and weight is 220g. Allowing 12g for your
gear, this all sounds very similar..</div>
<div class="moz-cite-prefix"><br>
</div>
Your part number is D42HSC1413B-24, so it looks like the D42 part
could be associated with faceplate size.
<div class="moz-cite-prefix"><br>
</div>
<div class="moz-cite-prefix">googling "d42hsc" stepper motor
indicates that d42hsc may be the family of the part you are
looking for.</div>
<div class="moz-cite-prefix">
<div class="moz-cite-prefix"><br>
</div>
<div class="moz-cite-prefix">The DC resistance of the Bangood part
above is 2.1ohms per phase.<br>
</div>
<div class="moz-cite-prefix"><br>
</div>
</div>
<div class="moz-cite-prefix">If you can measure low resistances with
accuracy, see what your resistance is for one phase. Or pass 200mA
through a phase and measure volt drop.</div>
<div class="moz-cite-prefix"><br>
</div>
<div class="moz-cite-prefix">-Mark<br>
</div>
<div class="moz-cite-prefix"><br>
</div>
<div class="moz-cite-prefix"><br>
</div>
<div class="moz-cite-prefix"><br>
</div>
<br>
<div class="moz-cite-prefix"><br>
</div>
<div class="moz-cite-prefix"><br>
</div>
<div class="moz-cite-prefix">On 24/02/2020 1:32 PM, Michael Dawson
wrote:<br>
</div>
<blockquote type="cite"
cite="mid:CABGCvpbU4aj5ecoPsuSnLLEPrvpmyJXm5sxAKDm_1L-xnOLV0w@mail.gmail.com">
<meta http-equiv="content-type" content="text/html; charset=UTF-8">
<div dir="ltr">
<div>4 wires into a 6 wire plug, colours from left looking
towards the motor, black, space, red, green, space, blue.<br>
Dimensions 42mm x 42mm Faceplate x 33mm depth of motor.</div>
<div>232 grams weight including cog, can weight without that is
that would help.<br>
</div>
<div><br>
</div>
<div>Cheers</div>
<div>Michael</div>
</div>
<br>
<div class="gmail_quote">
<div dir="ltr" class="gmail_attr">On Mon, 24 Feb 2020 at 13:06,
Mark Atherton <<a href="mailto:markaren1@xtra.co.nz"
moz-do-not-send="true">markaren1@xtra.co.nz</a>> wrote:<br>
</div>
<blockquote class="gmail_quote" style="margin:0px 0px 0px
0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">Hi
Michael,<br>
<br>
Welcome aboard.<br>
<br>
A few parameters which may be useful:<br>
<br>
- How many wires, what colours<br>
<br>
- Overall dimensions<br>
<br>
- Weight<br>
<br>
Regards, Mark<br>
<br>
<br>
<br>
On 24/02/2020 12:25 PM, Michael Dawson wrote:<br>
> I am trying to calibrate the A4988 drivers for the
stepper motors for <br>
> my laser engraver/cutter, using Arduino Uno and the CNC
shield, <br>
> (because the one that came with the cutter was pirated
software and <br>
> didn't work how it was supposed to and I want to run
laserGRBL anyway).<br>
><br>
> The issue I am having is, I have not got the specs for
the stepper <br>
> motors and aliexpress did not provide the specs.<br>
><br>
> I think they are nema17, but the only hint I have to that
is that when <br>
> I search on the number etched into the motors
D42HSC141B-24 I find an <br>
> old banggood ad saying they are nema17 but if you click
on the link <br>
> the original ad is long gone.<br>
><br>
> I currently have them set to 0.952v when measured
connected to the <br>
> arduino and cnc shield which is what was suggested, if
they were rated <br>
> to 1.7A. I'm hoping that is correct for these steppers,
so I guess my <br>
> question is does anybody have these same steppers and
know the specs, <br>
> or do they know it they are indeed rated to 1.7A<br>
><br>
> Or is there a way to find the Amp rating other than the
etching on the <br>
> side of the stepper?<br>
><br>
> Any help would be much appreciated.<br>
><br>
> Oh hi BTW, my name is Michael, one or two of you may know
me, I ran <br>
> Red Dwarf BBS back in the day, (I just remembered, I had
the Red Dwarf <br>
> logo display in RIP script when you logged in, pity that
never really <br>
> took off.)<br>
><br>
> Michael<br>
><br>
><br>
><br>
> _______________________________________________<br>
> Chchrobotics mailing list <a
href="mailto:Chchrobotics@lists.ourshack.com"
target="_blank" moz-do-not-send="true">Chchrobotics@lists.ourshack.com</a><br>
> <a
href="https://lists.ourshack.com/mailman/listinfo/chchrobotics"
rel="noreferrer" target="_blank" moz-do-not-send="true">https://lists.ourshack.com/mailman/listinfo/chchrobotics</a><br>
> Mail Archives: <a
href="http://lists.ourshack.com/pipermail/chchrobotics/"
rel="noreferrer" target="_blank" moz-do-not-send="true">http://lists.ourshack.com/pipermail/chchrobotics/</a><br>
> Meetings usually 3rd Monday each month. See <a
href="http://kiwibots.org" rel="noreferrer" target="_blank"
moz-do-not-send="true">http://kiwibots.org</a> for <br>
> venue, directions and dates.<br>
> When replying, please edit your Subject line to reflect
new subjects.<br>
<br>
<br>
<br>
_______________________________________________<br>
Chchrobotics mailing list <a
href="mailto:Chchrobotics@lists.ourshack.com"
target="_blank" moz-do-not-send="true">Chchrobotics@lists.ourshack.com</a><br>
<a
href="https://lists.ourshack.com/mailman/listinfo/chchrobotics"
rel="noreferrer" target="_blank" moz-do-not-send="true">https://lists.ourshack.com/mailman/listinfo/chchrobotics</a><br>
Mail Archives: <a
href="http://lists.ourshack.com/pipermail/chchrobotics/"
rel="noreferrer" target="_blank" moz-do-not-send="true">http://lists.ourshack.com/pipermail/chchrobotics/</a><br>
Meetings usually 3rd Monday each month. See <a
href="http://kiwibots.org" rel="noreferrer" target="_blank"
moz-do-not-send="true">http://kiwibots.org</a> for venue,
directions and dates.<br>
When replying, please edit your Subject line to reflect new
subjects.</blockquote>
</div>
<br>
<fieldset class="mimeAttachmentHeader"></fieldset>
<pre class="moz-quote-pre" wrap="">_______________________________________________
Chchrobotics mailing list <a class="moz-txt-link-abbreviated" href="mailto:Chchrobotics@lists.ourshack.com">Chchrobotics@lists.ourshack.com</a>
<a class="moz-txt-link-freetext" href="https://lists.ourshack.com/mailman/listinfo/chchrobotics">https://lists.ourshack.com/mailman/listinfo/chchrobotics</a>
Mail Archives: <a class="moz-txt-link-freetext" href="http://lists.ourshack.com/pipermail/chchrobotics/">http://lists.ourshack.com/pipermail/chchrobotics/</a>
Meetings usually 3rd Monday each month. See <a class="moz-txt-link-freetext" href="http://kiwibots.org">http://kiwibots.org</a> for venue, directions and dates.
When replying, please edit your Subject line to reflect new subjects.</pre>
</blockquote>
<p><br>
</p>
</body>
</html>