<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
</head>
<body text="#000000" bgcolor="#FFFFFF">
<div class="moz-cite-prefix"><br>
Hey Andrew, <br>
<br>
been a while. <br>
<br>
I actually did this for a blind in my house this year. <br>
I had a friend building a house who wanted to do 18 of them (yes,
18!). Not wanting to pay $400 each he sourced the motors from
China for about 50 bucks a piece. These came with a remote control
and settable limits etc and they mount inside the blind itself. <br>
<br>
Problem was, they didn't have attachment hardware. In comes the 3d
printer. problem solved and I got a motor for mine as payment. <br>
<br>
Before that I'd tried door window motor with extra gearing. even
that didn't have enough oomph to draw the blind (although I
probably could have added weight to balance it a bit). <br>
<br>
Hope that helps. <br>
CR<br>
<br>
<br>
<br>
On 25/09/2017 5:38 PM, Andrew Errington wrote:<br>
</div>
<blockquote type="cite"
cite="mid:CAGZkoWQeYbXC94wRDTWeZqOhGH72cSAi5Zgswh-f67wzghE0rw@mail.gmail.com">
<div dir="auto">
<div>There's also "fishing line I happen to have to hand", which
is clearly unsuitable in this case.
<div dir="auto"><br>
</div>
<div dir="auto">I'm going to try the builder's line again.
This time with a cable tie that I can crank down on to get
the tension.</div>
<div dir="auto"><br>
</div>
<div dir="auto">Thanks,</div>
<div dir="auto"><br>
</div>
<div dir="auto">Andrew</div>
<br>
<div class="gmail_extra"><br>
<div class="gmail_quote">On Sep 25, 2017 5:01 PM, "Charles
Manning" <<a href="mailto:cdhmanning@gmail.com"
moz-do-not-send="true">cdhmanning@gmail.com</a>>
wrote:<br type="attribution">
<blockquote class="quote" style="margin:0 0 0
.8ex;border-left:1px #ccc solid;padding-left:1ex">
<div dir="ltr">
<div>There's fishing line... and fishing line.<br>
<br>
</div>
Nylon stretches like anything. Braid (eg. <a
href="https://www.completeangler.co.nz/line-95/braid-97/"
target="_blank" moz-do-not-send="true">https://www.completeangler.co.<wbr>nz/line-95/braid-97/</a>)
has practically no stretch and is available in many
colours and strengths.<br>
<br>
</div>
<div class="gmail_extra"><br>
<div class="gmail_quote">
<div class="elided-text">On Mon, Sep 25, 2017 at
3:51 PM, Andrew Errington <span dir="ltr"><<a
href="mailto:erringtona@gmail.com"
target="_blank" moz-do-not-send="true">erringtona@gmail.com</a>></span>
wrote:<br>
</div>
<blockquote class="gmail_quote" style="margin:0 0 0
.8ex;border-left:1px #ccc solid;padding-left:1ex">
<div class="elided-text">
<div dir="auto">Hi everyone,
<div dir="auto"><br>
</div>
<div dir="auto">I thought I'd start a new
thread, as we got away from the relative
merits of Banggood vs DealExtreme.</div>
<div dir="auto"><br>
</div>
<div dir="auto">I am trying to motorise my
curtains, particularly as there are six
windows in one room, plus home automation is
cool.</div>
<div dir="auto"><br>
</div>
<div dir="auto">So far I have identified a
suitable motor and gearbox, 12Vdc supply,
60rpm output, with good torque and fairly
quiet.</div>
<div dir="auto"><br>
</div>
<div dir="auto">At one end the motor, with a
16-tooth GT2 pulley, is attached to the wall
using a purlin bracket (purlin brackets are
cool). At the other, I am using a
sewing-machine bobbin on an M6 bolt as a
pulley.</div>
<div dir="auto"><br>
</div>
<div dir="auto">It's early days, but I have
tried builder's line, which doesn't stretch,
but does slip. I have tried fishing line,
which does stretch, and slips.</div>
<div dir="auto"><br>
</div>
<div dir="auto">I think GT2 toothed belt would
work well, but I haven't tried it yet.</div>
<div dir="auto"><br>
</div>
<div dir="auto">The motor is temporarily
connected to a 12V battery for testing.
Later I will use an ESP8266 with microPython
to control the motor.</div>
<div dir="auto"><br>
</div>
<div dir="auto">Finally, I'll link it to home
automation software and relax in my chair as
the sun goes down and the curtains gently
and quietly close.</div>
<div dir="auto"><br>
</div>
<div dir="auto">That's my plan, but there is
plenty of room for alternatives or failure.</div>
<div dir="auto"><br>
</div>
<div dir="auto">The attached link is for a
belt clamp and tensioner made from zip-ties,
which I think I will adopt!</div>
<div dir="auto"><br>
</div>
<div dir="auto">Best wishes,</div>
<div dir="auto"><br>
</div>
<div dir="auto">Andrew</div>
<div dir="auto"><br>
</div>
<div dir="auto"><a
href="http://diyprojects.eu/wp-content/uploads/2017/01/belt-connection-zip-ties.jpg"
target="_blank" moz-do-not-send="true">http://diyprojects.eu/wp-conte<wbr>nt/uploads/2017/01/belt-connec<wbr>tion-zip-ties.jpg</a><br>
</div>
</div>
<br>
</div>
______________________________<wbr>_________________<br>
Chchrobotics mailing list <a
href="mailto:Chchrobotics@lists.ourshack.com"
target="_blank" moz-do-not-send="true">Chchrobotics@lists.ourshack.co<wbr>m</a><br>
<a
href="https://lists.ourshack.com/mailman/listinfo/chchrobotics"
rel="noreferrer" target="_blank"
moz-do-not-send="true">https://lists.ourshack.com/mai<wbr>lman/listinfo/chchrobotics</a><br>
Mail Archives: <a
href="http://lists.ourshack.com/pipermail/chchrobotics/"
rel="noreferrer" target="_blank"
moz-do-not-send="true">http://lists.ourshack.com/pipe<wbr>rmail/chchrobotics/</a><br>
Meetings usually 3rd Monday each month. See <a
href="http://kiwibots.org" rel="noreferrer"
target="_blank" moz-do-not-send="true">http://kiwibots.org</a>
for venue, directions and dates.<br>
When replying, please edit your Subject line to
reflect new subjects.<br>
</blockquote>
</div>
<br>
</div>
<br>
______________________________<wbr>_________________<br>
Chchrobotics mailing list <a
href="mailto:Chchrobotics@lists.ourshack.com"
moz-do-not-send="true">Chchrobotics@lists.ourshack.<wbr>com</a><br>
<a
href="https://lists.ourshack.com/mailman/listinfo/chchrobotics"
rel="noreferrer" target="_blank"
moz-do-not-send="true">https://lists.ourshack.com/<wbr>mailman/listinfo/chchrobotics</a><br>
Mail Archives: <a
href="http://lists.ourshack.com/pipermail/chchrobotics/"
rel="noreferrer" target="_blank"
moz-do-not-send="true">http://lists.ourshack.com/<wbr>pipermail/chchrobotics/</a><br>
Meetings usually 3rd Monday each month. See <a
href="http://kiwibots.org" rel="noreferrer"
target="_blank" moz-do-not-send="true">http://kiwibots.org</a>
for venue, directions and dates.<br>
When replying, please edit your Subject line to reflect
new subjects.<br>
</blockquote>
</div>
<br>
</div>
</div>
</div>
<br>
<fieldset class="mimeAttachmentHeader"></fieldset>
<br>
<pre wrap="">_______________________________________________
Chchrobotics mailing list <a class="moz-txt-link-abbreviated" href="mailto:Chchrobotics@lists.ourshack.com">Chchrobotics@lists.ourshack.com</a>
<a class="moz-txt-link-freetext" href="https://lists.ourshack.com/mailman/listinfo/chchrobotics">https://lists.ourshack.com/mailman/listinfo/chchrobotics</a>
Mail Archives: <a class="moz-txt-link-freetext" href="http://lists.ourshack.com/pipermail/chchrobotics/">http://lists.ourshack.com/pipermail/chchrobotics/</a>
Meetings usually 3rd Monday each month. See <a class="moz-txt-link-freetext" href="http://kiwibots.org">http://kiwibots.org</a> for venue, directions and dates.
When replying, please edit your Subject line to reflect new subjects.</pre>
</blockquote>
<p><br>
</p>
</body>
</html>