<div dir="ltr"><div><div>Mark<br><br></div>First you need to decode the serial. You might then find it is some semi-standard protocol such as DMX (used for stage/studio lighting control).<br><br></div>If you're just after the mechanical stuff and don't need to keep it pristine, you might consider fitting a new micro and writing your own firmware.<br><br><div><br><br></div></div><div class="gmail_extra"><br><div class="gmail_quote">On Sun, May 14, 2017 at 12:38 PM, Mark Atherton <span dir="ltr"><<a href="mailto:markaren1@xtra.co.nz" target="_blank">markaren1@xtra.co.nz</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">Hello everyone,<br>
<br>
Chocolate fish time...<br>
<br>
Just playing with a Fujinon CPT-1A-10DA pan and tilt head, these units are used in the broadcast TV arena. It may use the same protocol as the EPT-5E series.<br>
<br>
Very little documentation supplied with the product, although appear to have confirmed that the unit is controlled using RS232.<br>
<br>
The manual for a suitable PSU was supplied, so managed to identify power and RS232 lines. Dismantled the unit to confirm that RS232 feeds pin 13 of a MAX232 (R1IN).<br>
<br>
After moving the pan channel (by hand) with power removed, the unit returns to previous position when 12V is applied; am assuming that the unit works OK.<br>
<br>
This unit was originally configured by BCL (now Kordia ?).<br>
<br>
Managed to find a suitable controller (EOP-102J-30E) on eBay for US$1100; would like to borrow it to do some comms sniffing but that seems unlikely.<br>
<br>
Finally, spotted that the unit sends a short message from it's RS232 port at power on. Looks like data cells are 200us wide, so maybe a 4800baud comms channel. Need to explore this more.<br>
<br>
Have found all manner of P&T protocols, some require an address field (RS485, or RS232) so that adds a further level of uncertainty/excitement to the proceedings.<br>
<br>
If anyone has experience with such devices, or know where correct documentation might be acquired, I will be most happy to hear from them.<br>
<br>
This is not a commercial project, and hair is being pulled out by the clump ...<br>
<br>
Regards, Mark<br>
<br>
<br>
______________________________<wbr>_________________<br>
Chchrobotics mailing list <a href="mailto:Chchrobotics@lists.linuxnut.co.nz" target="_blank">Chchrobotics@lists.linuxnut.co<wbr>.nz</a><br>
<a href="http://lists.ourshack.com/mailman/listinfo/chchrobotics" rel="noreferrer" target="_blank">http://lists.ourshack.com/mail<wbr>man/listinfo/chchrobotics</a><br>
Mail Archives: <a href="http://lists.ourshack.com/pipermail/chchrobotics/" rel="noreferrer" target="_blank">http://lists.ourshack.com/pipe<wbr>rmail/chchrobotics/</a><br>
Meetings usually 3rd Monday each month. See <a href="http://kiwibots.org" rel="noreferrer" target="_blank">http://kiwibots.org</a> for venue, directions and dates.<br>
When replying, please edit your Subject line to reflect new subjects.<br>
</blockquote></div><br></div>