<div dir="ltr">My colleague did not end up using BLE on the WiPy2. At present, Micropython does not provide access to all of the features, and proved to be buggy for the features he wanted to use. That was a few months ago, so things might have changed by now...the problems of using a new(ish) device with ESP32 libraries and Micropython libraries all in a state of flux...we hope things will get better.<div><br></div><div>Stephen</div></div><div class="gmail_extra"><br><div class="gmail_quote">On 10 April 2017 at 21:19,  <span dir="ltr"><<a href="mailto:stephen.irons@clear.net.nz" target="_blank">stephen.irons@clear.net.nz</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">

I have used the ESP32 as included on the recently released WiPy2 module, as well as the LoPy (EPS32 with an additional LoRa radio device connected via SPI). These are available from <a href="http://www.pycom.io" target="_blank">www.pycom.io</a>.<div><br></div><div>I have used Wi-Fi and LoRa only. One of our guys has played with the BLE, I wll ask how well it worked.<div><br></div><div>I have not tested the Wi-Fi range; we use it around the office only. The LoRa range was phenomenal (but very low data rate).</div><div><br></div><div><span class=""><div>The WiPy family run MicroPython. It works rather well, but, as expected with firmware that is only a few months old, there are a number of significant bugs in both the ESP development tools and the Micropython firmware (but obviously no problems with my Python code!)</div><div><br></div><div>The Micropython firmware includes libraries for SPI and I2C which I have used to talk to other devices (temperature sensors, Panasonic Grideye device, etc). </div><div><br></div></span><div>The Micropython firmware also has drivers for various LCD modules, as well as libraries for drawing lines and text on full-graphics LCDs. I have not actually used these libraries. I'm not sure about 480x320 pixels: most examples are for 128x96, with 12K pixels rather than 150K.</div><div><br></div><div>Power consumption is disappointingly high, if that is a concern. 2xAA cells would last days or weeks with Wi-Fi off, rather than months or years.</div><span class=""><div><br></div><div>Stephen Irons</div><br>On Thu, Apr 6, 2017 at 11:28 PM, Robin Gilks <<a href="mailto:robin@gilks.org" target="_blank">robin@gilks.org</a>> wrote:<br>
</span><div><div class="h5"><blockquote type="cite"><div class="m_-8118666581098230048plaintext" style="white-space:pre-wrap">I know a few peeps have used the ESP8266 but I wonder if anyone has tried
the newer all shiny ESP32 (dual core, BLE etc).

I'm particularly interested in the range compared to say a Lantronics
XPICO which is physically about the same size (maybe a bit bigger) and
whether the GPIO can drive a small (say 480x320) tft display in either 8
bit or SPI modes (I can't see enough pins for 16 bit).

Cheers


<div>-- 
</div>Robin Gilks



______________________________<wbr>_________________
Chchrobotics mailing list <a href="mailto:Chchrobotics@lists.linuxnut.co.nz" target="_blank">Chchrobotics@lists.linuxnut.<wbr>co.nz</a>
<a href="http://lists.ourshack.com/mailman/listinfo/chchrobotics" target="_blank">http://lists.ourshack.com/<wbr>mailman/listinfo/chchrobotics</a>
Mail Archives: <a href="http://lists.ourshack.com/pipermail/chchrobotics/" target="_blank">http://lists.ourshack.com/<wbr>pipermail/chchrobotics/</a>
Meetings usually 3rd Monday each month. See <a href="http://kiwibots.org" target="_blank">http://kiwibots.org</a> for venue, directions and dates.
When replying, please edit your Subject line to reflect new subjects.
</div></blockquote></div></div></div></div></blockquote></div><br></div>