<div dir="ltr"><div>I'm at the point of ordering a 14 panel Grid Tied Solar Photovoltaic system using LG panels and EnaSolar inverter. The array will be mounted on steep sloping high roof and so faulty panel detection could be an issue. The standard practice is to wire up to 14 panels in series with bridging diodes in the panels to bypass faulty or shaded panels. I don't want to run a season or two with faulty panels. Its been suggested that bringing two arrays of 7 panels back to the inverter would allow me to compare the output from each string with a reasonably standard wiring configuration. I'm beginning to see the benefit of the enphase microinverter solution. Innovative suggestions anyone?<br>
<br></div>Richard<br></div>