<div dir="ltr">I have come up with a procedure to enable the ISP port on the displays we got at the last meeting. This then allows unrestricted reprogramming of the device. I have had success with all three displays I tried it on.<div>
<br></div><div>The connection between the reset IC and the MCU must be temporarily broken. I just removed (and later replaced) the reset IC but there are other options we can explore. Cutting the reset pin directly on the MCU may work. The relevant trace on the PCB is somewhat obscured by the smart card socket. </div>
<div><div><br></div><div><div>I will bring my gear along to the Monday meeting for anyone who wants to unlock their display. It would be good to get an idea of how many there are to do - can you please respond if you want to do this to your display. It would be helpful if you could prepare by opening the case and removing the four T5 screws holding the main PCB down. There is no need to remove the LCD.</div>

<div><br></div><div>Spencer</div></div></div><div><br></div></div>