<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 TRANSITIONAL//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV="Content-Type" CONTENT="text/html; CHARSET=UTF-8">
<META NAME="GENERATOR" CONTENT="GtkHTML/3.18.3">
</HEAD>
<BODY>
If you already have a Duemilanove or Dicimila you can easily (connectors and wire) make an in-circuit programming cable:<BR>
<BR>
<A HREF="http://www.geocities.jp/arduino_diecimila/bootloader/index_en.html">http://www.geocities.jp/arduino_diecimila/bootloader/index_en.html</A><BR>
<BR>
Cheers<BR>
<BR>
On Sat, 2009-11-14 at 22:22 +1300, Michael Hope wrote:
<BLOCKQUOTE TYPE=CITE>
<PRE>
Hi there. This might be interesting to those who are into AVRs but
are parallel port impaired. It turns out that you can use most any
FTDI based ARM JTAG dongle plus a patch to avrdude to program the
chips. Performance is decent at about 1 s for a erase/program/verify
cycle on a 1 k program to a MEGA48.
It should also work on any FTDI chip with the MPSSE engine which is
useful if you have one of the FTDI demo boards.
My notes and patches are at:
<A HREF="http://wiki.seabright.co.nz/wiki/AvrdudeAndFtdi.html">http://wiki.seabright.co.nz/wiki/AvrdudeAndFtdi.html</A>
-- Michael
_______________________________________________
Chchrobotics mailing list <A HREF="mailto:Chchrobotics@lists.linuxnut.co.nz">Chchrobotics@lists.linuxnut.co.nz</A>
<A HREF="http://lists.ourshack.com/mailman/listinfo/chchrobotics">http://lists.ourshack.com/mailman/listinfo/chchrobotics</A>
Mail Archives: <A HREF="http://lists.ourshack.com/pipermail/chchrobotics/">http://lists.ourshack.com/pipermail/chchrobotics/</A>
Web site: <A HREF="http://kiwibots.org">http://kiwibots.org</A>
Meeting Dates:
Tue 15 December 2009 6.30pm
Tue 16 February 2010 6.30pm
When replying, please edit your Subject line to reflect new content.
</PRE>
</BLOCKQUOTE>
</BODY>
</HTML>