<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 TRANSITIONAL//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV="Content-Type" CONTENT="text/html; CHARSET=UTF-8">
<META NAME="GENERATOR" CONTENT="GtkHTML/3.18.3">
</HEAD>
<BODY>
Use a PIC 12F675?<BR>
<BR>
I've got some of those in me bits box, and some code that does 10 and 8 bit A/D to rs232 on a couple of ping, serial commands in one pin, result out the other. Wrote it a while ago for a dodgy PLC project. :-).<BR>
<BR>
They are cheaper than a 4 port 10bit A/D.... No good for high speed stuff using rs232 signalling, but very simple to implement in software on your 'parent' micro, and handy in an 8pin DIP with no support components bar a monocap on the rail and a resistor/cap filter on the inputs if required...<BR>
<BR>
Cheers, Me.<BR>
<BR>
On Tue, 2008-10-07 at 21:00 +1300, Carl Ranson wrote:
<BLOCKQUOTE TYPE=CITE>
<PRE>
Hey all,
Its been a long time but life has finally calmed down to the point where
I can work my robot projects.
First order of business is to get the ADC going again on my bot.
So in the interest of speed, I'm hoping to find an ADC that already has
code n parallax's site.
Anyone got any of these in a DIP package in their parts box? (I'll be
happy to pay for them of course)
ADC0834
ADC0838
MAX1202
J-ADC383
TLV2543
Yes, I know there are a lot of other ways to go about it, but I'm
looking to apply the KISS principal here.
Cheers all,
CR
_______________________________________________
Chchrobotics mailing list
<A HREF="mailto:Chchrobotics@lists.linuxnut.co.nz">Chchrobotics@lists.linuxnut.co.nz</A>
<A HREF="http://lists.ourshack.com/mailman/listinfo/chchrobotics">http://lists.ourshack.com/mailman/listinfo/chchrobotics</A>
</PRE>
</BLOCKQUOTE>
</BODY>
</HTML>