[chbot] Anyone got a spare ATA such as an SPA112 or SPA122

[Robin Gilks]

Hi Mark
I'm using my original World Exchange unit now I know how to get into it.
All your ATAs seem to be OK as well (at least I can default them & connect
to them OK)


On Fri, Aug 5, 2022 at 11:31 AM Mark Atherton <markaren1 at xtra.co.nz> wrote:

> So are you using one of my ATAs, or did you manage to re-provision the
> World Exchange unit ?
>
> On 5/08/2022 11:04 AM, Robin Gilks wrote:
> > The SPA112 original I have uses DHCP on its rj45 i/f. Looks like the
> > spa122 with the 'internet' and 'ethernet' ports has DHCP on the
> > 'internet' port and the fixed 192.168.15.1 on the 'ethernet' port. (so
> > the documentation is half right!!)
> > I'm all up and running now but it looks like the provisioning script
> > 2talk use for the spa1xx series is a bit borked as it's supposed to set
> > the admin password but it seems to have changed everything so I no
> > longer have access via the web interface.
> > In due course I'll default it again and set it up manually so I can keep
> > admin access
> >
> > On Fri, Aug 5, 2022 at 7:18 AM Mark Atherton <markaren1 at xtra.co.nz
> > <mailto:markaren1 at xtra.co.nz>> wrote:
> >
> >     Robin, which ATA are you talking about ?
> >
> >     On 4/08/2022 11:54 PM, Robin Gilks wrote:
> >      > Entirely by accident I discovered that all the Cisco documents are
> >      > wrong!! It does not default to 192.168.15.1, it defaults to DHCP.
> >      > Since I already had a MAC address filter in my dnsmasq.conf file
> for
> >      > this device it got the same IP as it's always had which I would
> have
> >      > found without the red herring.
> >      > So much for all my efforts creating aliased IP addresses on my PC
> to
> >      > make one in the correct subnet. Logged into the original IP,
> >     configured
> >      > and about an hour later it burst into life.
> >      >
> >      >
> >      > On Thu, Aug 4, 2022 at 6:15 PM Synco Reynders
> >     <synco.reynders at gmail.com <mailto:synco.reynders at gmail.com>
> >      > <mailto:synco.reynders at gmail.com
> >     <mailto:synco.reynders at gmail.com>>> wrote:
> >      >
> >      >     With ethernet cable plugged into PC, have you tried linux
> 'sudo
> >      >     netdiscover' command?
> >      >
> >      >     On Wed., 3 Aug. 2022, 23:47 Robin Gilks, <gb7ipd at gmail.com
> >     <mailto:gb7ipd at gmail.com>
> >      >     <mailto:gb7ipd at gmail.com <mailto:gb7ipd at gmail.com>>> wrote:
> >      >
> >      >         I don't seem to be able to unlock my World Exchange
> >     provisioned
> >      >         SPA112 box. so I can move it to 2talk.
> >      >         I've tried the reset button until it flashes and it's
> >     supposed
> >      >         to come up onto 192.168.15.1 but even with an aliased
> >     interface
> >      >         in the same subnet I can't ping or connect to it. Totally
> >      >         stuffed with no landline and m-in-law relies on that to
> >     call us
> >      >         from the UK.
> >      >
> >      >         --
> >      >         Robin Gilks
>
> _______________________________________________
> Chchrobotics mailing list Chchrobotics at lists.ourshack.com
> https://lists.ourshack.com/mailman/listinfo/chchrobotics
> Mail Archives: http://lists.ourshack.com/pipermail/chchrobotics/
> Meetings usually 3rd Monday each month. See http://kiwibots.org for
> venue, directions and dates.
> When replying, please edit your Subject line to reflect new subjects.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ourshack.com/pipermail/chchrobotics/attachments/20220805/e358c800/attachment.html>