[chbot] [OT] Looking for Aluminum Composite Material, for enclosure panels

[Peter Ellens]

They will do it. But are stupidly expensive!

They want $563 for 3 simple 420mmx420mmx4mm panels and a few notches cut 
out.

Anyone got any other options?



On 29/08/21 12:05 am, GRAHAM CHRISTIE wrote:
> Hi Peter
> Try Mulford plastics in Sydenham
> https://www.mulfordplastics.co.nz/products/
> Regards
> Graham
>> On 28 August 2021 at 22:04 Peter Ellens <ellensp at gmail.com> wrote:
>>
>>
>> Has anyone in there travels come across a local (preferably
>> Christchurch) suppler of ACM?  (Aluminum Composite Material,
>> polyethylene core sandwiched between two thin aluminum panels) With CNC
>> or laser access to cut it?
>>
>> I know some sign makers use this sort of material.
>>
>> Looking for 3-4 mm thick, black colour on both faces, 3 pieces 420x420mm
>>
>>
>> Peter
>>
>>
>>
>>
>> _______________________________________________
>> Chchrobotics mailing list Chchrobotics at lists.ourshack.com
>> https://lists.ourshack.com/mailman/listinfo/chchrobotics
>> Mail Archives: http://lists.ourshack.com/pipermail/chchrobotics/
>> Meetings usually 3rd Monday each month. See http://kiwibots.org for venue, directions and dates.
>> When replying, please edit your Subject line to reflect new subjects.