[chbot] Cutting 3-6 mm MDF

[chris at trash.co.nz]

I can CNC route em for you if you don't mind coming for a drive out to 
Leeston..

Machine is 600x1000 with a vacuum bed so quick'n'easy assuming you've 
got a DXF of what you want.

I seem to remember there's someone on-list with a decent sized laser as 
well..  Smaller kerf and smoke instead of dust but the same end result. 
:)

- Chris H.

On 2021-11-22 12:17, Marshland Engineering wrote:
> I'm making some shadow boards for my lathe tools. I'm wanting to cut 
> 3-6 mm
> MDF. The sheet size will be something like 400x300 mm. High density 
> foam could
> be another option, but with the MDF I can write on it.
> 
> Any suggestions as to where I can get it done
> 
> Thanks Wallace.
> 
> 03 3237449
> 
> 
> _______________________________________________
> Chchrobotics mailing list Chchrobotics at lists.ourshack.com
> https://lists.ourshack.com/mailman/listinfo/chchrobotics
> Mail Archives: http://lists.ourshack.com/pipermail/chchrobotics/
> Meetings usually 3rd Monday each month. See http://kiwibots.org for
> venue, directions and dates.
> When replying, please edit your Subject line to reflect new subjects.