[chbot] Data filter

[Charles Manning]

You can also do a moving average then you don't need to lose any samples.

On Wed, May 12, 2021 at 4:17 PM Marshland Engineering <
marshland at marshland.co.nz> wrote:

> I think I have found the solution which is to average over a bigger sample
> range. I did not want to do this originally as I would loose data either
> side
> of my averaging. If I averaged over say 30 samples, I would loose 15
> samples
> at the beginning and the end of the data. If I only had 120 samples to
> start,
> 30 is quite a lot.
>
> The solution was to start collecting data both before t-start and after
> t-end.
> I originally had the software start and stop recording against RPM values.
> Now I start recording before I get to my minimum value and recored a
> further
> second or 2 after the max. This should work.
>
> Cheers Wallace.
>
>
>
>
>
>
> _______________________________________________
> Chchrobotics mailing list Chchrobotics at lists.ourshack.com
> https://lists.ourshack.com/mailman/listinfo/chchrobotics
> Mail Archives: http://lists.ourshack.com/pipermail/chchrobotics/
> Meetings usually 3rd Monday each month. See http://kiwibots.org for
> venue, directions and dates.
> When replying, please edit your Subject line to reflect new subjects.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ourshack.com/pipermail/chchrobotics/attachments/20210512/5a4a00c3/attachment.html>