[chbot] [OT] Recommendation for steel fabrication

[GRAHAM CHRISTIE]

Hi Stuart

What sort of time frame are you looking at?

Regards
Graham
> On 18 November 2020 at 14:34 Mark Atherton <markaren1 at xtra.co.nz> wrote:
> 
> 
> Looks something like powder-coated 3mm ali.
> 
> Putting a 50mm (?) radius on such a long piece (2000mm) of material is 
> possibly the difficult part. Raw sheet should be around 1100mm wide.
> 
> I would start the process by getting the price of a 2400 x 1200 x 3mm 
> sheet of ali, then get a price for a full powder-coat.
> 
> Add 50% on top of both of those prices to give a ball-park one-off 
> fabrication cost, and see how that matches up against $3800 + shipping.
> 
> The manufacturer will certainly have savings associated with streamline 
> process, amortisation of cost of fixtures and associated with know-how, 
> and presumably a sweet-deal with suppliers and finishers.
> 
> Most interested to see what the final numbers are.
> 
> The manufacturers $3800 price tag for such a unit does not seem 
> ridiculous to me.
> 
> -mark
> 
> 
> 
> 
> On 18/11/2020 2:01 PM, Stuart Brown wrote:
> > Hi
> > 
> > A friend has asked if I know of a place in Christchurch that can build a 
> > table like this one 
> > https://www.jardin.co.nz/collections/bellevie/bellevie-table-196-x-90cm
> > 
> > Recommendations, any help would be welcomed?
> > 
> > thanks
> > 
> > Stuart
> > 
> > _______________________________________________
> > Chchrobotics mailing list Chchrobotics at lists.ourshack.com
> > https://lists.ourshack.com/mailman/listinfo/chchrobotics
> > Mail Archives: http://lists.ourshack.com/pipermail/chchrobotics/
> > Meetings usually 3rd Monday each month. See http://kiwibots.org for venue, directions and dates.
> > When replying, please edit your Subject line to reflect new subjects.
> > 
> 
> 
> _______________________________________________
> Chchrobotics mailing list Chchrobotics at lists.ourshack.com
> https://lists.ourshack.com/mailman/listinfo/chchrobotics
> Mail Archives: http://lists.ourshack.com/pipermail/chchrobotics/
> Meetings usually 3rd Monday each month. See http://kiwibots.org for venue, directions and dates.
> When replying, please edit your Subject line to reflect new subjects.