[chbot] Ethernet to Wireless bridge client, Low power consumption, low cost.

[Henri Shustak]

Sorry, cant think of any thing off the shelf. Some of the stuff from
Ubiquity is about as close as I can think of. They start at data rates way
higher, than what you need 100mb/s.

On Wed, Aug 19, 2020 at 9:28 AM Mark Atherton <markaren1 at xtra.co.nz> wrote:

> I need a small product (less than 50mm cube, or similar volume) with
> 2.4GHz RP-SMA antenna one end, RJ45 the other, a USB socket to power the
> unit off of 5V, and costs less than NZ$30 (new or used).
>
> Not fussed about speed, this will be part of a telnet interface. Needs
> to be able to be configured as a wireless-bridge.
>
> Preferably readily available in NZ, and a commercial product (not a PCB
> assembly).
>
> Happy to re-flash a commercial product with open-source firmware as
> required. Have previously used a Dlink DIR-300 loaded with Gargoyle, but
> would really prefer to move to a lower-power, smaller solution.
>
> Thoughts appreciated.
>
> -Mark
>
> _______________________________________________
> Chchrobotics mailing list Chchrobotics at lists.ourshack.com
> https://lists.ourshack.com/mailman/listinfo/chchrobotics
> Mail Archives: http://lists.ourshack.com/pipermail/chchrobotics/
> Meetings usually 3rd Monday each month. See http://kiwibots.org for
> venue, directions and dates.
> When replying, please edit your Subject line to reflect new subjects.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ourshack.com/pipermail/chchrobotics/attachments/20200827/10304b34/attachment.html>