[chbot] Chchrobotics Digest, Vol 133, Issue 10

[Mark Atherton]

What is your displacement sensor (Mfg + model) ?

What is your rotational sensor (Mfg + model) ?

What do you need as final data (if you know / measure the profile, you 
can calculate velocity, acceleration) ?

-mark

On 18/10/2018 12:58 PM, Marshland Engineering wrote:
> Had a flurry of replies.
>
> Here is the setup.
>
> http://www.marshland.co.nz/ftp/CAM/Jig.JPG
>
> The data
>
> http://www.marshland.co.nz/ftp/CAM/Plots.jpg
>
>
> A very small step in measuring makes a huge step in the velocity graph and a
> similar one in the acceleration.
>
> Since posting, I did think about letting the cam run through several cycles
> and the averaging the new data. Probably best to do that first. It is the
> stiction that is the probable issue with the linear encoder. I am measuring to
> 1 micron.
>
> Maybe best to not average the raw data but average the velocity.
>
> Cheers Wallace
>
>
> _______________________________________________
> Chchrobotics mailing list Chchrobotics at lists.ourshack.com
> https://lists.ourshack.com/mailman/listinfo/chchrobotics
> Mail Archives: http://lists.ourshack.com/pipermail/chchrobotics/
> Meetings usually 3rd Monday each month. See http://kiwibots.org for venue, directions and dates.
> When replying, please edit your Subject line to reflect new subjects.