[chbot] FETs and motor control

[Charles Manning]

Mark

I think I have a tube of TO220 through hole FETS that I am keen to get rid
of and maybe a couple of FPGA boards.

Can I add them to the pile?

Thanks

Charles






On Mon, Mar 19, 2018 at 10:00 AM, Mark Atherton <markaren1 at xtra.co.nz>
wrote:

> Hello everyone,
>
> Part of the component donation legacy from our friends at Trimble include
> some parts that may be useful for motor control (among other things);
> unsurprisingly, everything is surface mount.
>
> Candidate parts include :
>
> IPD70N10S3-12 (TO-252)
>
> IPB107N20N3 (TO-263)
>
> IRS21084 (SOIC-14)
>
> NACZ221M50V10X10.5TR13F (10.0 x 10.5mm)
>
> If you can put any of these parts to good use, please drop me an email
> off-list with the following details:
>
> - a brief description of the project
>
> - quantity required of each component
>
> - suggested donation amount ($$) to our host club
>
> - a firm assurance that the parts will only be used for personal education
> (and not for resale, or any similar commercial use)
>
> ... and we can take it from there.
>
> Requests for unreasonably large quantities will likely be turned down,
> printed in 48 point font, and placed above the trading table for the mirth
> of others... :)
>
> It may take some time to get this stuff together, so please be patient.
>
> Hope to see you this evening.
>
> Regards, Mark
>
> _______________________________________________
> Chchrobotics mailing list Chchrobotics at lists.ourshack.com
> https://lists.ourshack.com/mailman/listinfo/chchrobotics
> Mail Archives: http://lists.ourshack.com/pipermail/chchrobotics/
> Meetings usually 3rd Monday each month. See http://kiwibots.org for
> venue, directions and dates.
> When replying, please edit your Subject line to reflect new subjects.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ourshack.com/pipermail/chchrobotics/attachments/20180319/60564a03/attachment.html>