[chbot] Very interesting 3D CAD program!

[Andrew Errington]

Yup. Fusion 360 is not free.

I like OpenSCAD. Free of cost, free of restriction.

Andrew


On Wed, Aug 1, 2018, 21:25 Mark Atherton <markaren1 at xtra.co.nz> wrote:

> Stuart is correct, real men don't use GUIs. Wonder if Antimony could be
> easily be re-written in Forth, that world make it complete :)
>
> Seriously for a minute thought, I do get nervous about cloud based apps
> like F-360. First, draw in a huge audience, get them hooked, and when
> they can't escape (just because so much has been committed to the
> application in terms of time and effort) the company starts charging for
> the software. One indicator might be that F-360 at some point no longer
> allows atomic elements to be exported to other packages.
>
> -Mark
>
>
>
>
>
>
> On 1/08/2018 9:07 PM, Mark Beckett wrote:
>  > You do realise Fusion360 is free for Hobbyists.?
>  >
>  > Basically as long as you're not making money from it, its free.
>  >
>  > Mark
>  >
>  > On 01/08/18 20:51, Stuart Brown wrote:
>  >> For all you 3D printer guys out there, check out this interesting
> CAD application. Watch the demo video to get an idea of how it works
>  >>
>  >> Antimony: http://www.mattkeeter.com/projects/antimony/3/
>
>
> _______________________________________________
> Chchrobotics mailing list Chchrobotics at lists.ourshack.com
> https://lists.ourshack.com/mailman/listinfo/chchrobotics
> Mail Archives: http://lists.ourshack.com/pipermail/chchrobotics/
> Meetings usually 3rd Monday each month. See http://kiwibots.org for
> venue, directions and dates.
> When replying, please edit your Subject line to reflect new subjects.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ourshack.com/pipermail/chchrobotics/attachments/20180801/6d20bff1/attachment-0001.html>