[chbot] STL file vs 3D printer frustration..

[Chris Hellyar]

Worked first time...

per the screenshots:

https://www.dropbox.com/sh/hzc9irjr3zezxbp/AACdn4ZhZXAnXIbFt3lFMQ32a?dl=0

Gives me somewhere to look in terms of the code in my openscad model,
and might have to check out simply3d as well..  Can't imagine I'll get
'er in doors using it, but might be handy for some of the stuff I want
to do.

Catcha.


On 6/09/17 23:09, Peter Ellens wrote:
> Can someone using a difference slicer (or maybe the xyzprinting one?)
>> have a go at opening this stl file and see if you can see what the issue
>> is?  (74k stl.. Just a widdle one)
>>
>> https://www.dropbox.com/s/u4oib2qpcsjkzkq/boxbig.stl?dl=0
> I threw it into simply3d 4
>
> It tells me there are non manifold edges, top left corner, down the
> left hand side, entire length