[chbot] Arduino Library copy/paste problem

m.beckett at amuri.net m.beckett at amuri.net
Thu Sep 29 10:54:02 BST 2016


  

Mr/Mrs Google ...


http://feedback.codebender.cc/knowledgebase/articles/92166-embedding-libraries-inside-a-sketch


For those not sure ... Codebender is an online compiler and has it's
own libraries 

Personally I can't see the point as it's easy to have
the whole Arduino IDE on a memory stick. 

Yes we've had this discussion
before on element14 community. 

Mark 

On Thu, 29 Sep 2016 22:00:28
+1300, Richard Jones wrote: 

> Posting on behalf of Peter...
> 
> hi
Pls reply to this directly thu my email as i can't rego thu website.
system fault 
> petermawhinney216 at gmail.com [1] 
> 
> I am a newbie.
trying figure Arduino out.
> 
> Having issues. trouble when not formerly
taught from beginning. Finding hrs are ticking by with no progress. 
>
no one to quickly ask doesn't help. 
> 
> Concerning Libraries that i
copied & pasted from 'codebender' ie FatSd.h / FatSd.cpp plus others 
>

> Got the 'SdFat' library to load in libraries but then the Sketch
couldn't find it. 
> I have just Noticed how the FILE TYPE COLUMN when
opened in folder says 'arduino' when it should be 'cpp' or 'h' like
other successful files when load thu zipfile 
> 
> Q - CAN SOMEONE GIVE
ME CLEAR INSTRUCTIONS HOW TO SET UP LIBRARY IE 'FATSD.H/.CPP' FROM
CODEBENDER. COPIED |+|AMP|+| PASTED. IN A CLEAR MANNER. 
> HOW TO
ACHIEVE THE CORRECT 'FILE TYPE' ETC 
> AND HOW TO LABEL FOLDERS IE DO U
HAVE TO USE CAPITALS 'FATSD' OR CAN IT BE 'FATSD' ?? 
> 
> Note - I have
noticed in all the examples i have seen of Arduino, having the correct
libraries is not clear enough or even mentioned. 
> And the tuition
videos i have seen don't cover copy & paste situations its all from zip
files etc. 
> 
> I AM TRY TO RUN THIS PROGRAM FOR MY *_RFID (READER
125KHZ UART) SWIPE CARD DATE/TIME STAMPED CSV SD DATALOGGER STATION*_ 
>
***program attached***
> 
> Q - IF SOMEONE HAS THE TIME TO RUN/COMPILE
THE PROGRAM WITH REFERENCE TO THE LIBRARIES NEEDED |+|AMP|+| WHERE
OBTAINED, IT WOULD BE GOOD LEARNING EXAMPLE FOR ME RATHER THAN BASHING
MY HEAD AGAINST COMPUTER. 
> 
> I am using Ide 1.6.12 the latest
version. 
> Chinese Uno (which has driver installed & works) 
> Rtc Sd
datalogger shield 
> Uart Rdif reader. 125khz Loose form, no case (yet
to arrive) 
> Battery Pack 
> Em4100 cards 125khz 
> 
> Also i was going
to use a typical sealed Rfid door reader $8 (because it was package
bulletproof, so easy to mount) but found out that it uses 'Manchester
coding' for the Rfid. 
> Found this decoding library. 
>
https://github.com/Sthing/AccessThing/tree/master/Arduino/libraries/EM4100
[2]
> 
> Q - HOW COMPLEX IS IT TO GRAFT IN THIS LIBRARY TO THE ATTACHED
PROGRAM?? 
> may use it. but if a package Uart Rf reader appears i won't
really need it

  

Links:
------
[1]
mailto:petermawhinney216 at gmail.com
[2]
https://github.com/Sthing/AccessThing/tree/master/Arduino/libraries/EM4100
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ourshack.com/pipermail/chchrobotics/attachments/20160929/8e49f3df/attachment.html>


More information about the Chchrobotics mailing list