[chbot] Help Richard identify required software

[tpots]

Hivery nice photos but please what is the name on the blue cover that has been taken off in photo 4 as that is poss what it is known as here 
RegardsDerek 

    On Thursday, 21 April 2016 4:20 PM, Mark Atherton <markaren1 at xtra.co.nz> wrote:
 

 Hello All,

At our last meeting (on Monday), Richard Barwick brought in a French 
made, 3 axis milling base. Photographs of the name plate, and some 
internal shots are below.

He will very much appreciate help identifying the required software to 
drive it. It appears to use RS232, but correctly has a USB/serial bridge 
attached.

Maybe you have seen such a unit, and know someone who may have required 
software, or perhaps know the NZ importer who might be able to help.

Any help appreciated.

Regards,

Mark

====

http://www.idesignz.org/RB//RB-router01.jpg
http://www.idesignz.org/RB//RB-router02.jpg
http://www.idesignz.org/RB//RB-router03.jpg
http://www.idesignz.org/RB//RB-router04.jpg
http://www.idesignz.org/RB//RB-router05.jpg
http://www.idesignz.org/RB//RB-router06.jpg
http://www.idesignz.org/RB//RB-router07.jpg



_______________________________________________
Chchrobotics mailing list Chchrobotics at lists.linuxnut.co.nz
http://lists.ourshack.com/mailman/listinfo/chchrobotics
Mail Archives: http://lists.ourshack.com/pipermail/chchrobotics/
Meetings usually 3rd Monday each month. See http://kiwibots.org for venue, directions and dates.
When replying, please edit your Subject line to reflect new subjects.


  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ourshack.com/pipermail/chchrobotics/attachments/20160421/37505bd4/attachment.html>