[chbot] STC Microprocessor

[Charles Manning]

If the one board is V1 and the other board is V4, then there is a good
chance the hardware has changed and V1 software might not work on a V4
board.

On Mon, Sep 7, 2015 at 11:10 PM, Marshland Engineering <
marshland at marshland.co.nz> wrote:

> I have 2 complete boards, Ver 1 (damaged inputs) and Ver 4. I would like
> Ver 1
> software copied onto the other board.
> Cant seem to find software that will read the STC chip if it is readable ?
>
> Cheers Wallace
>
>
>
> _______________________________________________
> Chchrobotics mailing list Chchrobotics at lists.linuxnut.co.nz
> http://lists.ourshack.com/mailman/listinfo/chchrobotics
> Mail Archives: http://lists.ourshack.com/pipermail/chchrobotics/
> Meetings usually 3rd Monday each month. See http://kiwibots.org for
> venue, directions and dates.
> When replying, please edit your Subject line to reflect new subjects.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ourshack.com/pipermail/chchrobotics/attachments/20150908/91a81e82/attachment-0001.html>