[chbot] Quick turn around PCB manufacture

[Quentin McDonald]

Hi,

I've used PCBZone. The turnaround was less than a week, although not by
much. Quality seemed fine, from memory it was about twice the cost of
OSHPark  and probably three times the Chinese ones.

http://www.pcbzone.net/


Quentin

On Thu, Sep 25, 2014 at 6:48 PM, Stephen Irons <stephen.irons at clear.net.nz>
wrote:

> Can anyone recommend a PCB manufacturer with a turn around time of
> less than 1 week.
>
> * quick turn around
> * two layer, plated through holes
> * solder mask and silk screen
> * reasonable cost
>
> I seem to remember this being discussed on the list occasionally, but
> * the list archives are not searchable
> * these things change with time
>
> Thank you
> Stephen Irons
>
> _______________________________________________
> Chchrobotics mailing list Chchrobotics at lists.linuxnut.co.nz
> http://lists.ourshack.com/mailman/listinfo/chchrobotics
> Mail Archives: http://lists.ourshack.com/pipermail/chchrobotics/
> Web site: http://kiwibots.org
> Meetings 3rd Monday each month.
>
> When replying, please edit your Subject line to reflect new content.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ourshack.com/pipermail/chchrobotics/attachments/20140925/b730dd1b/attachment.html>