[chbot] Display mounting

[Mark Beckett]

Cheers Col.

The keypad provided extra fixing, but I recall Darren having trouble 
removing one with just the silicon holding it.

Cheers for the drawing. (I still think your briefcase was the best bit)

Mark

Col wrote:
> On 17/09/14 18:47, Mark Beckett wrote:
>> I don't but Colin may be able to help ....since he's still at the former
>> place where we did this.
>>
>
> Actually the acrylic was also held on by some keypad screws through 
> the enclosure.
>
> Sorry no photo, but for a limited time a quick and dirty drawing 
> instead. Let the silicon set and run a blade round the hole edge. Then 
> the excess silicon will peel off.
>
> https://www.dropbox.com/s/e73zaix7jnotnii/display.png?dl=0
>
>
>
> Col
>
> _______________________________________________
> Chchrobotics mailing list Chchrobotics at lists.linuxnut.co.nz
> http://lists.ourshack.com/mailman/listinfo/chchrobotics
> Mail Archives: http://lists.ourshack.com/pipermail/chchrobotics/
> Web site: http://kiwibots.org
> Meetings 3rd Monday each month.
>
> When replying, please edit your Subject line to reflect new content.
>