[chbot] Tiny board mod help?

[Spencer Travers]

I am happy to help out but Mark may be more experienced with this sort of
thing. I'm in Avonhead.
On 3 Jan 2014 14:55, "Peter Ellens" <ellensp at xnet.co.nz> wrote:

> Hi Guys
>
> I find i'm in need of a tiny board modification. But this is literally so
> small I can't do this.
>
> Is anyone able to do a tiny mod for me? Someone with experience and the
> right gear for really small stuff?
>
> Some details.
>
> The component is a http://www.nxp.com/documents/data_sheet/74LVC1G125.pdf
> Seems to be in a http://www.nxp.com/documents/outline_drawing/sot353-1_po.
> pdf package
> Which is 0.64 mm pin spacing
>
> Pin 1 is connected to pin 2. But pin 1 should be grounded, Ie connected to
> Pin3.
>
> Here is photo of the chip on the board.
> http://forums.reprap.org/file.php?file=23913
>
> So a tiny cut and bodge wire is needed.
>
> This is on a Arduino Due Board, and causes issues with serial
> communications.
>
> More details can be found here http://forums.reprap.org/read.php?13,287434
>
> Thanks
>
> Peter
>
>
> _______________________________________________
> Chchrobotics mailing list Chchrobotics at lists.linuxnut.co.nz
> http://lists.ourshack.com/mailman/listinfo/chchrobotics
> Mail Archives: http://lists.ourshack.com/pipermail/chchrobotics/
> Web site: http://kiwibots.org
> Meetings 3rd Monday each month at Tait Radio Communications, 175 Roydvale
> Ave, 6.30pm
>
> When replying, please edit your Subject line to reflect new content.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ourshack.com/pipermail/chchrobotics/attachments/20140103/361510e3/attachment.html>