[chbot] ARM boards

[Simon Chester]

Here's the datasheet:
http://ics.nxp.com/products/lpc3000/datasheet/lpc3152.lpc3154.pdf

Also, why would throw away the JTAG debugger?

On Fri, Nov 18, 2011 at 10:09 PM, Volker Kuhlmann
<list0570 at paradise.net.nz>wrote:

> On Fri 18 Nov 2011 12:18:44 NZDT +1300, Pieter Britz wrote:
>
> >   Do you still have any ARM based boards left you could move on?
> > I'd like to experiment on a ARM with FreeRTOS and some sensors.
>
> Probably the cheapest way to get a basic ARM board is to buy an
> LPCXpresso board, they start at around $40+pp. On board is an LED, an 8k
> I2C EEPROM and a LAN8720 Ethernet PHY (but no magnetics or jack), and a
> truckloads of holes to solder your cables into.
>
> The other half of the PCB is occupied by a JTAG style paperweight (using
> a top-secret NXP ARM for which there isn't even a datasheet) which you
> saw off (it's designed for that) and biff into the bin.
>
> Volker
>
> --
> Volker Kuhlmann
> http://volker.dnsalias.net/     Please do not CC list postings to me.
>
> _______________________________________________
> Chchrobotics mailing list Chchrobotics at lists.linuxnut.co.nz
> http://lists.ourshack.com/mailman/listinfo/chchrobotics
> Mail Archives: http://lists.ourshack.com/pipermail/chchrobotics/
> Web site: http://kiwibots.org
> Meetings 3rd Monday each month at Tait Radio Communications, 175 Roydvale
> Ave, 6.30pm
>
> When replying, please edit your Subject line to reflect new content.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.ourshack.com/pipermail/chchrobotics/attachments/20111118/90a71c1e/attachment.htm