[chbot] ARM boards

[Paul Davey]

On Sat, Nov 12, 2011 at 7:14 PM, Michael Hope <michaelh at juju.net.nz> wrote:
> Hi there.  Sorry for the commercial-ish email, but I've been cleaning
> up my office and have some ARM based boards to move on.  Most can run
> embedded Linux and might be good for fancier vision based / autonomous
> designs...
>
> Free to a good home:
>  SBC2440-II ARMv9 400 MHz (http://www.armkits.com/Product/SBC2440-III.asp)
>  QQ2440V3 ARMv9 400 MHz (can't find a link)
>  Mini3250 ARMv9 266 MHz with FPU (http://armkits.com/product/mini3250.asp)
>
> BeagleBoard clones (720 MHz OMAP3):
>  IGEPv2 with 512 MB RAM and WiFi (http://en.wikipedia.org/wiki/IGEPv2)
>  2 x KwikByte KBOC BB2 (http://www.kwikbyte.com/KBOC_BB2.html)
>
> ETT STM32 ARM Stamp
> (http://www.micromouseonline.com/2009/05/21/ett-stm32-arm-stamp/)
>
> Let me know if you're interested.  I figure the BeagleBoards are worth
> $50 and the STM32 $10.
>
> -- Michael

I'll take the IGEPv2 Beagle board clone if its still available when I
have $50 in a week or two.
Otherwise I may be able to find some use for the Mini3250