[chbot] Anyone making PCBs?

[Wes Edwards]

I've used Press-n-Peel with good results.

It is available from Jaycar, although it is a bit pricey.
http://www.jaycar.co.nz/productView.asp?ID=HG9980&keywords=PCB&form=KEYWORD

Wes

-----Original Message-----
From: chchrobotics-bounces at lists.linuxnut.co.nz
[mailto:chchrobotics-bounces at lists.linuxnut.co.nz] On Behalf Of Andrew
Errington
Sent: Saturday, 4 June 2011 4:40 p.m.
To: Christchurch Robotics
Subject: Re: [chbot] Anyone making PCBs?

On Sat, 04 Jun 2011 13:33:03 Volker Kuhlmann wrote:
> On Tue 31 May 2011 18:19:18 NZST +1200, Carl Ranson wrote:
> > Yup, I've done this once. I used special transfer paper that is designed
> > for the purpose.
>
> Would you have some sources, for the record?

The most common brand is Press-n-Peel, but they don't have an NZ or Oz 
distributor.

A

_______________________________________________
Chchrobotics mailing list Chchrobotics at lists.linuxnut.co.nz
http://lists.ourshack.com/mailman/listinfo/chchrobotics
Mail Archives: http://lists.ourshack.com/pipermail/chchrobotics/
Web site: http://kiwibots.org
Meeting Time and Location uncertain while Science Alive is out of action.

When replying, please edit your Subject line to reflect new content.