[chbot] 19" rack rails...

[Richard Jones]

Part of the hard work solution for wooden DIY mounting rails might be
something like these M6 bushes that Charles brought along on his workbench
assistant :

https://picasaweb.google.com/113134050398543502524/ChchRobotics2011May16?authkey=Gv1sRgCPqpyfaB8pHDkwE#5622898950868210994

Especially if your tool box contains a hammer :-)

Richard

On Thu, Jul 14, 2011 at 11:59 PM, Chris Hellyar <chris at trash.co.nz> wrote:

> A bit of a random question, but figured this was the best place to ask. :)
>
> I'm on the hunt for some standard 19" rack mounting rails....  The bits
> that go either side of the rack to clip the blind nuts into.
>
> I want to make a customer rack/stand for some 19" gear by mounting the
> rails to some MDF.
>
> So...
>
> Anyone know where you can buy the stuff, or alternately, anyone got some
> old rack components lying around I can magpie? :-)
>
> FYI: I need 10U high/long bits..
>
> Cheers, Chris H
>
> _______________________________________________
> Chchrobotics mailing list Chchrobotics at lists.linuxnut.co.nz
> http://lists.ourshack.com/mailman/listinfo/chchrobotics
> Mail Archives: http://lists.ourshack.com/pipermail/chchrobotics/
> Web site: http://kiwibots.org
> Meeting Time and Location uncertain while Science Alive is out of action.
>
> When replying, please edit your Subject line to reflect new content.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.ourshack.com/pipermail/chchrobotics/attachments/20110715/368c7e55/attachment.htm