[chbot] DIP package ADC chips?

[Michael Pearce]

There may have been some MCP3xxx 12/13 bit ADC's in the box of bits
that I left (Otherwise you can sample them from Microchip if you don't
mind a wait)

Mike

On Tue, Oct 7, 2008 at 2:50 AM, Chris Hellyar <chris at trash.co.nz> wrote:
> Use a PIC 12F675?
>
> I've got some of those in me bits box, and some code that does 10 and 8 bit
> A/D to rs232 on a couple of ping, serial commands in one pin, result out the
> other.  Wrote it a while ago for a dodgy PLC project. :-).
>
> They are cheaper than a 4 port 10bit A/D....  No good for high speed stuff
> using rs232 signalling, but very simple to implement in software on your
> 'parent' micro, and handy in an 8pin DIP with no support components bar a
> monocap on the rail and a resistor/cap filter on the inputs if required...
>
> Cheers, Me.
>
> On Tue, 2008-10-07 at 21:00 +1300, Carl Ranson wrote:
>
> Hey all,
>
> Its been a long time but life has finally calmed down to the point where
> I can work my robot projects.
>
> First order of business is to get the ADC going again on my bot.
> So in the interest of speed, I'm hoping to find an ADC that already has
> code n parallax's site.
>
> Anyone got any of these in a DIP package in their parts box? (I'll be
> happy to pay for them of course)
> ADC0834
> ADC0838
> MAX1202
> J-ADC383
> TLV2543
>
> Yes, I know there are a lot of other ways to go about it, but I'm
> looking to apply the KISS principal here.
> Cheers all,
> CR
>
> _______________________________________________
> Chchrobotics mailing list
> Chchrobotics at lists.linuxnut.co.nz
> http://lists.ourshack.com/mailman/listinfo/chchrobotics
>
>
> _______________________________________________
> Chchrobotics mailing list
> Chchrobotics at lists.linuxnut.co.nz
> http://lists.ourshack.com/mailman/listinfo/chchrobotics
>
>



-- 
Kiwacan
http://www.kiwacan.co.nz
http://www.kiwacandirect.com
USA: 1-800-490-2091
NZL:  +64-3-669-0077